Click image to view original image
By shape, Supreme PDC cutter includes three types:
1.
Normal round shape
2.Sphere shape
3.Irregular shape
For round shape, We have 3 series which are listed as below:
SSI Series Polycrystalline Diamond Compact adopts flat tine junction plane. The thickness of diamond layer is about 0.8~1.2mm. It is mainly used in stone processing and hole (blind hole) can be punched according to customers' requirements.
SSI standard specification:
|
Product No. |
ΦD (mm) |
T (mm) |
t (mm) |
Diamond chamfer（mm） |
|
|
|
SSI-0803 |
8.00±0.03 |
3.53±0.10 |
1.0±0.20 |
0.3±0.10 |
|
SSI-1003 |
10.00±0.03 |
3.53±0.10 |
1.0±0.20 |
0.3±0.10 |
|
|
SSI1303 |
13.44±0.03 |
3.53±0.10 |
1.0±0.20 |
0.3±0.10 |
SSII Series Polycrystalline Diamond Compact adopts slotted junction plane. Thickness of diamond layer is about 1.2~2.0mm.
SSII standard specification:
|
Product No. |
ΦD （mm） |
T (mm) |
t (mm) |
Diamond chamfer(mm) |
|
|
|
SSII-0803 |
8.00±0.03 |
3.53±0.10 |
1.5±0.20 |
0.3±0.10 |
|
SSII-0808 |
8.00±0.03 |
8.00±0.10 |
1.5±0.20 |
0.3±0.10 |
|
|
SSII-1010 |
10.00±0.03 |
10.00±0.10 |
1.5±0.20 |
0.3±0.10 |
|
|
SSII-1303 |
13.44±0.03 |
3.53±0.10 |
1.5±0.20 |
0.3±0.10 |
|
|
SSII-1308 |
13.44±0.03 |
8.00±0.10 |
1.5±0.20 |
0.3±0.10 |
|
|
SSII-1313 |
13.44±0.03 |
13.20±0.10 |
1.5±0.20 |
0.3±0.10 |
|
|
SSII-1608 |
16.00±0.03 |
8.00±0.10 |
1.7±0.20 |
0.3±0.10 |
|
|
SSII-1613 |
16.00±0.03 |
13.20±0.10 |
1.7±0.20 |
0.3±0.10 |
|
|
SSII-1908 |
19.05±0.03 |
8.00±0.10 |
2.0±2.0 |
0.3±0.10 |
|
|
SSII-1913 |
19.05±0.03 |
13.20±0.10 |
2.0±2.0 |
0.3±0.10 |
SSIII series Polycrystalline Diamond Compact adopts new net-slotted junction plane, which better removes internal stress of polycrystalline diamond compact; meanwhile the thickness of diamond layer is increased to 1.8~2.5mm and makes wear resistance much higher.
SSIII standard specification:
|
Product No. |
ΦD （mm） |
T (mm) |
t (mm) |
Diamond chamfer(mm) |
|
|
|
SSIII-0806 |
8.00±0.03 |
6.00±0.10 |
2.0±0.20 |
0.3±0.10 |
|
SSIII-0808 |
8.00±0.03 |
8.00±0.10 |
2.0±0.20 |
0.3±0.10 |
|
|
SSIII-1008 |
10.00±0.03 |
8.00±0.10 |
2.0±0.20 |
0.3±0.10 |
|
|
SSIII-1010 |
10.00±0.03 |
10.00±0.10 |
2.0±0.20 |
0.3±0.10 |
|
|
SSIII-1308 |
13.44±0.03 |
8.00±0.10 |
2.0±0.20 |
0.3±0.10 |
|
|
SSIII-1313 |
13.44±0.03 |
13.20±0.10 |
2.0±0.20 |
0.3±0.10 |
|
|
SSIII-1608 |
16.00±0.03 |
8.00±0.10 |
2.0±0.20 |
0.3±0.10 |
|
|
SSIII-1613 |
16.00±0.03 |
13.20±0.10 |
2.0±0.20 |
0.3±0.10 |
|
|
SSIII-1616 |
16.00±0.03 |
16.31±0.10 |
2.0±0.20 |
0.3±0.10 |
|
|
SSIII-1908 |
19.05±0.05 |
8.00±0.10 |
2.2±0.20 |
0.3±0.10 |
|
|
SSIII-1913 |
19.05±0.05 |
13.20±0.10 |
2.2±0.20 |
0.3±0.10 |
|
|
SSIII-1916 |
19.05±0.05 |
16.31±0.10 |
2.2±0.20 |
0.3±0.10 |
|
|
SSIII-1919 |
19.05±0.05 |
19.00±0.10 |
2.2±0.20 |
0.3±0.10 |
