10 Pair Krone Terminal BlockBack MountYH-6089 1 002-02 10 Pair Connection typeYH-6089 1 102-02 10 Pair Disconnection typeProfileYH-6089 1 120-02 10 Pair Connection typeYH-6089 1 121-02 10 Pair Disconnection typeDetails:1.Material: Housing-ABS UL94V-2 Base-ABS UL94V-2 Contact -0.5mm thickness Phosphor bronze plating over nickel over silver2.Cable wire sizes: Solid copper wires up to 0.4mm-0.8mm in DIA Insulation PE or PVC insulated wire3. Wire: AWG 24-26Descriptions:This LSA plus disconnection modules are used throughout the distribution level,Website:http://www.ftth-network.com, in the main distribution frame (MDF), in the cross connection cabinet (CCC) and in the distribution point (DP) boxes. It is highly reliable and cost-effective wire connection system for modern telecommunications and data networks.It adopts IDC (Insulation Displacement Connection) technique, which means that no soldering, wire-stripping or the use of screws is necessary, and which clamps the wires at a 45 degree angle, thus dramatically reducing the risk of a poor termination and increasing the wiring productivity. The IDC contact is phosphor bronze, with silver plating.They use a normally closed two piece contact, with a convenient disconnection feature. By inserting a disconnect plug into a wire pair, you can temporarily or permanently disconnect the circuit. A test cord can be inserted into a pair to test each side of the circuit independently. This greatly accelerates fault identification.The center contact point can also be used for monitoring or overvoltage protection.Package: 10pcs/bag + inner box 250pcs/carton58x27x24cm/carton 14kg/cartonDraw:
Click image to view original image
