5V1A USB Phone Charger

1.High quality over current,Website:http://www.szhehuiyuan.com,over voltage,over temperature, short circuit,etc.2.Internal resistance to high temperature and heat resistance of silicone.3.Intelligent recognition, not to hurt the machineFeatures:Model No.CC00302AInput Voltage100~240Vac (90~264Vac min/max)EfficiencyDoE Level VI and CoC V5 tier 2Frequency50/60Hz Nom (47~63Hz min/max)No Load Input Power≦75mW @ 115/230VacInput Current0.2A max @ 115Vac; 0.15A max @ 230VacProtectionOVP, OCP, SCP, OTP, Brown-in/Brown-outOutput Voltage Range5V±5%Isolation3000Vac, Primary to secondary 10mA, 1 minOutput Current Range0~1.0AInsulation ResistancePrimary to secondary 500Vdc 100Mmin.Maximum Output Power5WOCP1.5A Max @ 90~264Vac, auto recoveryOutput Ripple & Noise200mVp-p Max. at 25℃SCPAuto recoveryEarth Leakage Current0.025mA Max.OVP<7.5V peak, at 0.05-1A load, auto recoveryAC Inrush Current30A max @ 25℃ and 264Vac inputAverage Efficiency73.77% Min @115Vac/60Hz, 230Vac/50HzOver-shoot<5.25Vdc ± 10%Efficiency @ 10% load64.59% Min @115Vac/60Hz, 230Vac/50HzHold-up Time10mS min @ 115Vac/230Vac, full loadDimension55.61 x 33.5 x 20.8 mmTurn-On Delay Time2000mS Max. @ 90Vac, full loadAC PlugUS and ChinaRise Time0mS Max.@ 230Vac, full loadEnvironmental Specifications:Safety and Compliance:Operating Temperature-10℃ ~ +45℃Safety Cerifications IEC60950, CBStorage Temperature-40℃ ~ +70℃EMI Compliant FCC part15 class B, EN55022 class B,Humidity, Operation5%~95% RHANSI C63.4 class B, VCCI class II rulesHumidity, Storage95% R.H.EMC CompliantAltitude5000MESD test EN 61000-4-2, Level 4, Criteria CMTBF(MIL-HDBK-217F) >100K hrs @ 230Vac, full load, 25°CRS EN 61000-4-3EFT test EN 61000-4-4,CS EN 61000-4-6Surge test EN 61000-4-5, Level 3, Criteria BDIP test EN 61000-4-11