Copper Mn Alloy 6J13

Hangzhou Ualloy Material Co.,Ltd is one of the best copper mn alloy 6j13 manufacturers and suppliers in China,Website:http://www.alloystrip.com, welcome to buy discount and low price shunt manganin, manganin 43, cumn12ni4, manganin, 6j13 from us, and also welcome to check the price and quotation with our factory. OHMALLOY Shunt Manganin 43(Precision Resistance wire)(Common Name: Manganin 43,CuMn12Ni4,Manganin，6J13) Shunt Manganin 43 is a copper-manganese-nickel alloy (CuMnNi alloy) for use at room temperature. The alloy is characterized by very low thermal electromotive force (emf) compared to copper. Shunt Manganin43 widely used for Shunt resistor with the highest requirements, shunt manganin43 has been used in precision built electrical components such as Wheatstone bridges, decade boxes, voltage drivers, potentiometers and resistance standards. Normal composition% Nickel 4 Manganese 12 Copper Bal. Typical Mechanical properties（1.0mm） Yield strength Tensile Strength Elongation Mpa Mpa % 180 390 15 Typical Physical properties Density (g/cm3) 8.4 Electrical resistivity at 20℃ (Ωmm2/m) 0.43 Temperature factor of resistivity（20℃~600℃）X10-5/℃ -7~40 Thermal coefficient at 20℃ (WmK) 22 EMF vs Cu(μV/℃ )(0~100℃ ) <2 Coefficient of thermal expansion Temperature Thermal Expansion x10-6/K 20 ℃- 100℃ 18 20 ℃- 400℃ 19.5 Specific heat capacity Temperature 20℃ J/gK 0.41 Melting point (℃) 960 Element working temperature in air (℃) 5~45 Magnetic properties non-magnetic Corrosion resistance performance Alloys Working In atmosphere at 20℃ Working at max temperature 200℃ Air and oxygen contain gases gases with Nitrogen gases with sulfur oxidability gases with sulfur reductibility carburization Manganin43 good bad bad bad bad good Style of supply Alloys Name Type Dimension Manganin43W Wire D=0.03mm~8mm Manganin43R Ribbon W=0.4~40 T=0.03~2.9mm Manganin43S Strip W=8~200mm T=0.1~3.0 Manganin43F Foil W=6~120mm T=0.003~0.1 Manganin43B Bar Dia=8~100mm L=50~1000