Two-component Convex Type Mark

If you are going to buy or wholesale CE certification two-component convex type marking paint ISO9001:2008 or you are planning to check the price with one of the famous two-component convex type marking paint manufacturers and suppliers,Website:http://www.roadmarkingsupplier.com, please feel free to contact TATU Traffic Group Co.,Ltd.Technical Data :Binderactive acrylic resinSpecific gravity1.99kg/LVolume solids98%Weight solids98%Volatile Organic CompoundNonTheoretical Spreading Rate3-3.5 kg/㎡ (dot area accounted for 60%, wet film thickness 1mm)Dry speed﹤20 minutes (25℃)Hardenerpowder / liquidColorwhite, yellowStorageDry, cool, binder and hardener should be stored separatelyExpiration dateone yearsummary:Two-component convex type marking paint is component-A paint after mixing hardener and then chemically cross-linked to form macromolecular network structure, which is different from the traditional one-component paint which is filmed by physical drying, so comparing with conventional paint, this paint has an incomparable high-strength, high wear-resistance, high toughness, good self-cleaning, and because of the dense internal organization, when it with the same sprinkling-surface-glass beads, the inverse reflection coefficient is much larger than hot melt marking lines, in particular with a large number of beads mixing in it, even if the surface sprinkled beads worn, it still has a good reflective effect, the effective life is much higher than hot melt marking lines.