Extrusion Lamination Machine F

If you are looking for new design,Website:http://www.yuzhe-honghua.com, full automatic extrusion lamination machine for kraft paper or sandwich packing, or you are going to import high speed PLC control products from a such factory, or you are planning to check the price with a such golden supplier, with large output extrusion lamination machine for kraft paper or sandwich packing for sale and providing with extrusion coating lamination machine for kraft paper or sandwich packing, multilayer extrusion lamination machine for kraft paper or sandwich packing, extrusion lamination coating plant for kraft paper or sandwich packing, co-extrusion laminating machine for kraft paper or sandwich packing on promotion, Yuzhe Intl Trading Company is always at your service. Ⅰ.Main feature and performance 1.The whole technics flow from unwinding of raw material to coating and winding adopts the advanced electric equipment and mechanism equipment, PLC Controller, Human machine interface，it could be controlled solely or together with high autoimmunization; 2. The double working position unwinding adopts the automatic rectifying. The coil unwinding and changing adopt automatic changing, cutting and material joining without speed reducing. The tension of the unwinding adopts the PLC controller, this ensure unwinding be smooth and in high speed;  3. The speed of extrusion and molding is controlled by PLC. The molding roller, silicone roller and assistant cooling roller adopts recycle water cooling structure, this structure ensure the good coating effect. The molding rollers clutch adopts the pneumatic controller; 4.The double working winding adopts the vector inverter and PLC controller, the coil changing adopts the automatic changing, cutting and material joining without speed reducing.This machine is suitable for coating laminating on the coil paper, aluminum foil, unwoven fabric, weave, BOPP, PE etc. Adopts the own patent technology, the products have good quality: high peel off strength, good matte effect, symmetrical thickness, good leak tightness and so on. Every standard of the products produced by this machine reach or exceed the industry standards. This machine is one of the most advanced heating melt coating machine in China.  Ⅱ.Main technical parameter: 1.Material Feeding canister and pole: diameter 90mm, L/D:32:1, mixed, material: 38CrMoAl,hardness treatment, surface with Nitride; 2.”T” shape stretchy mould: new type featheredge mould; 3. The gear box of extender adopts high strength hard tooth surface, with high obturation, good reliability , high capacity, little noise, long using life ,steady transmission and other futures; 4. Applying material : roll base paper, PET,BOPP and so on; 5.Coating material: PE,PP; 6.Coating width: 1100～1500mm; 7.Thickness of coating: 0.012～0.035mm(single layer);  8.Symmetrical degree of coating: +6%; 9.Peel off strength: 3-5N/30mm(according to the extruding material); 10.Max extruding capacity: 180kg/h; 11.Mechanism speed: 0～150m/min; 12 The unwinding frame adopts the run over way of double shafts turning and winging , high speed to change roll without reducing speed , automatic cutting, unwinding tension adopts vector frequency conversion motor to control automatically( foreign PLC mould controlling ,wimble tension) rectifying system adopts trolley type automatic pneumatic rectifying equipment, rectifying journey:  ±100mm,deviation rectifying precision: ±0.5mm; 13. Rewinding adopts double shaft turning and winging center unwinding method high speed to change roll without reducing speed , automatic cutting, rewinding tension adopts vector frequency conversion motor to control automatically( foreign PLC mould controlling ,wimble tension); 14. Unwinding diameter and rewinding diameter: 1200mm; 15. Pneumatic roller for unwinding and rewinding: 3” (diameter: φ73mm); 16. Total power: about 130 Kw; 17. Size (L×W×H): 8500mm×8500mm×3200mm； 18. Total weight: about 18000kg.