Elgiloy Alloy

Elgiloy AlloyPrecision Alloy 3J21*Elgiloy alloy(Co40CrNiMo),Website:http://www.astrongmagnet.com,AMS 5833,UNS R30003,Chinese 3J21Usage: It is applied to make antimagnetic, corrosionproof and long range elasticity alloy for elastic cell.Note: This Cobalt-Chromium-Nickel alloy also known as Elgiloy gives a combination of high strength, ductility and good mechanical properties and is age hardenable. Phynox also has excellent fatigue life, corrosion resistance in numerous environments and is non-magnetic. This alloy is recommended where a high resistance to corrosion and / or low relaxation at temperatures up to 380 C are required.Relative Grade:RussiaU.S.A.JapanFranceStandard40KJXMElgiloyNAS604PH K R NphynoxYB/T5253-1993Grade and Chemical Composition (see Table 1) Table 1 Grade and Chemical Composition of 3J21GradeChemical Composition(%)CMnSiPSNiCrCoMoFe3J210.07~0.121.70~2.300.600.0100.01014.0~21.019.0~21.039.0~41.06.50~7.50BalanceRemark: The size and shape must be tally with the standard of GB/T15006 for  elastic alloy .Mechanical Property(see Table 2) Table 2 Mechanical PropertyShapeDelivery StateThickness&Diameter/mmProperty&ClassficationMechanical PropertyTensile Strength ( b/Mpa)Elongation  (%)StripCold RollingTk0.20~2.50A1175~14705B1470~17653WireCold DrawnDia0.20~5.00A1275~1570B1570~1865The strip has been used typically for springs requiring a combination of high strength up to     800 F(427 C),excellent corrosion resistance, and good fatigue properties, but usage is not limited to such applications. Alloy is nonmagnetic.Physical Property (see table 3)  Table 3  Physical Property of 3J21 after agedItemTargetModulus of Elasticity E/Mpa196000~215500Shear Modulus G/Mpa73500~83500Density (g/cm3)8.4Mean coefficient of linear expansion20-100 C/(10-6/K)14Resistivity   /(  m)0.92Magnetic Rate k/10650~1000Remark: The K value is the value of the centimeter gram second system.Specification: Sheet/Plate, Bar/Rod/Wire/CoilSize Range:1. Sheet---Thickness 0.10mm~2.50mm, width:10.0~210mm,Condition: cold rolled, bright,2. Plate---Thickness 2.5mm~40.0mm,width: 300mm,Condition: cold rolled, hot rolled3. Round Wire---Dia 0.1mm~Dia 7.0mm,Condition: cold drawn, bright4. Flat Wire---Dia 0.5mm~Dia 7.0mm,length: 1000mm,Condition:flat rolled, bright5. Bar---Dia 7.0mm~Dia 10.0mm,length: 2000mm,Condition:cold drawn,bright