Advantages of Fiber Marking:1. Excellent beam quality: This series of machines are much better than the traditional marking machine,Website:http://www.mglasermachine.com, condensation diameter is less than 20um, divergence angle is 1/4 of the semiconductor pumping source laser, used in accurate marking.2. Low use-cost: high turnover ratio between electricity and laser, the whole machine power consumption is less than 600W, which is 1/10 of light pumping source laser.3. Maintenance-free Operation: There is no need of any maintenance for laser, or to adjust /clean the lens.4. Long working life: using fiber laser source, the working hours can reach as long as 100,000 hours.5. Small machine body can be used in severe environment: using fiber to realize laser transport and the structure is compact, which makes possible to work under severe environment such as Shock and vibration, high-temperature.6. High processing speed: 2-3 times of the traditional marking machine. Widely used in the field of high requirements of depth, Smoothness and precision, such as jewelry, decoration, paper packing, auto parts, electronic hardware, sanitary and bitmap. It can works on metal and mostly non-metal surface. Z axis : 500mm;X axis: 110mm;Y axis: 110mm;Optional working area: 110*110mm, 175*175MM, 200*200MM; for metal engraving suitable selec 110*110mm and 175*175mm;for plastic suitable for 110*110mm, 175*175MM, 200*200MM;Machine working with laptop or computer, connect with USB Port. Standard machine not including laptop/computer. ModelMG-F20PLaser Power 20WWavelength1064nm Marking Area110*110mmLine-speed≤12000mm/s Line WidthMin.0.012mm Characters Size0.1mmMarking Depth≤0.5mmRepeat Accuracy±0.003mmMachine Power500-750WVoltage220V/Single phase/50HZ/4ACooling SystemAir CoolingWork environmentTemperature:5~28℃, humidity<80%Life Time100,000 HoursDimension60*40*75CMGross Weight60-80KG Marking Samples: metals / Non-metals
Click image to view original image
