Click image to view original image
A. INTRODUCTION
This electric wheelchair ramp is suitable for the lower-floor buses. It is installed under the step of passenger door. The platform can extant steadily. When the platform extents to the final position, the rear end of platform lift automatically to eliminate the height of the threshold, so that lever of the rear of platform can reach the lever of the floor.
The XINDER electric wheelchair ramp has gained the Chinese paten (the number of the paten: Zl 02 2 83133.9). The products has the running test of extending and retracting 10000 times continually, and been proved with good reliability and safety.
B. ADVANTAGES
C. SAFETY FUNCTION
B. ADVANTAGES
¨ Be made of stainless steel, aluminum alloy and aluminum honeycomb.
¨ it extents and retracts steadily
¨ It is light and anti-corrosive.
¨ the computer program and the proximity sensor can realize the customizable electronic control
¨ EMC tested in accordance with 95/94 standards.
¨ Unique patent, super thin (60mm), super light (45Kg)
¨ Unique double hinged mechanism for lifting rear-end of ramp can eliminate height of threshold of passenger door, thus ramp can installed underside of passenger door step and that won’t weaken strength of skeleton near door, convenient for wheelchair to access vehicle
¨ Intelligent control by computer program and non-contact access switch, retract automatically in case contact obstruction and also interlocked with passenger door
¨ Electric driven device achieve ramp smoothly extended and retracted
¨ Manufactured by stainless steel and aluminum alloy, honeycomb aluminum plate. With superexcellent performance of anti-corrosion.
C. SAFETY FUNCTION
Ø Adopt anti-skid aluminum plate on the surface of platform
Ø With sound and flashlight alarm during operation of wheelchair ramp
Ø With danger symbol on the outer-edge of ramp
Ø The ramp is interlocked with passenger door.
D. MANUAL FUNCTION
Ø When the driving motor is invalid, the ramp can be retracted manually.
In the course of the ramp extends, if it touches any barrier, the ramp will retract automatically. For a moment, it will extend again. If this status repeats 3 times, then the ramp retracts to the rest position for safety.
E. TECHNICAL SPERCIFICATION
|
Model
|
Drive mode
|
Platform net size (L*W)
|
Installation
|
|
EWR-1
|
Electric
|
1055×1008（China）
|
Installed underside of passenger door step, the rear of ramp will rise automatically to eliminate height of threshold of passenger door and level with vehicle floor.
|
|
EWR-5
|
Electric
|
940×1008
（DAEWOO, KOREA）
|
|
Technical Specification
|
EWR-1
|
EWR-5
|
|
Raising Height of rear-end of Ramp (extend fully)
|
55 mm
|
|
|
Max. Working Height
|
300 mm
|
380 mm
|
|
Max Loading Capacity
|
350 kg
|
|
|
Dead weight
|
43~46 kg
|
|
|
Rated Voltage of Driving Motor
|
DC 24V
|
|
|
Max. Working Voltage of Driving Motor
|
DC ≤31V
|
|
|
Max. Driving Current:
|
10A
|
|
|
Time for Retraction or Extend
|
12~16 sec.
|
|
|
Working Temperature of Ramp
|
-20 ~ +50 ℃
|
|
