GK800 High Performance Closed-

GK800 High Performance Closed-loop Vector Control VFD Drives  GK800 Series High Performance VFD Variable Frequency Drives,Website:http://www.variable-frequency-inverter.com, adopting most advanced close-loop vector control technology, are able to perform precise control on both asynchronous motors and permanent magnet synchronous motors. GK800 series, one of the real drives leaders, are superb in demanding applications with excellent performance no matter in speed control, torque control, position control, field weakening control, or response time, and so on. 1. Distinctive advantages of GTAKE close-loop vector control VFD Variable Frequency Drive Based on the top software and hardware elite, modern and scientific producing workmanship, rigorous quality control systems and management team, GTAKE VFD Variable Frequency Drives have many advantages, some of which are listed as below: • Apply to asynchronous AC motor and permanent magnet synchronous AC motor; • Starting torque:180% at 0.25Hz (SVC pattern), 200% at 0Hz (VC pattern); • Speed adjustable range: 1:200 (SVC pattern), 1:1000 (VC pattern); • Speed accuracy: +/-0.2% (SVC pattern), +/-0.02% (VC pattern); • Over load capability: 150% 1minute, 180% 10s, 200% 0.5s; • Abundant frequency command sources; • Diverse input and output terminals; • Ambient temperature: -10°C~50°C; • High precise torque constraint, process PID control, simple PLC, wobble frequency control, contracting brake control, field weakening control, all sides protection, etc. • Online and offline autotune of motor parameters can both performed; • Extremely short-time acceleration can be performed without any trip, such as 0.1s or 0s from 0Hz to 50Hz; • No derating ambient temperature: -10-50 centigrade; • Customized products and services are also welcome; • Flexible command sources, parameters setting, and all sided equipment protection function automatically; • The malfunction ratio is lower than 1% within warranty period, based on the statistics. 2. Information of Product Model Product model and technical data Model Power Rating (kW) Rated Output Current (A) Rated Input current (A) Applicable motor (kW) Brake unit GK800-4T2.2B 2.2 5.5 9.2 2.2 Built-in GK800-4T3.7B 3.7 9 14.9 3.7 GK800-4T5.5B 5.5 13 21.5 5.5 GK800-4T7.5B 7.5 17 27.9 7.5 GK800-4T11B 11 24 39 11 GK800-4T15B 15 30 50.3 15 GK800-4T18.5(B)* 18.5 39 60 18.5 Built-in optional GK800-4T22(B)* 22 45 69.3 22 GK800-4T30(B)* 30 60 86 30 GK800-4T37(B)* 37 75 104 37 GK800-4T45(B)* 45 91 124 45 GK800-4T55 55 112 150 55 Externally mounted when needed GK800-4T75 75 150 201 75 GK800-4T90 90 176 160** 90 GK800-4T110 110 210 192** 110 GK800-4T132 132 253 232** 132 GK800-4T160 160 310 285** 160 GK800-4T185 185 350 326** 185 GK800-4T200 200 380 354** 200 GK800-4T220 220 430 403** 220 GK800-4T250 250 470 441** 250 GK800-4T280 280 520 489** 280 GK800-4T315 315 590 571** 315 GK800-4T355 355 650 624** 355 GK800-4T400 400 725 699** 400 ** means GK800-4T110  or above is provided with an external-mounted DC reactor in shipment as default1AC/3AC  208V/220V/230V 50/60Hz -10%~10%, 50Hz/60Hz -5%~5% Model Power Rating (kW) Rated Output Current (A) Applicable motor (kW) Brake unit GK800-2T2.2B 2.2 10 2.2 Built-in GK800-2T3.7B 3.7 16.5 3.7 GK800-2T5.5B 5.5 24 5.5 GK800-2T7.5B 7.5 30 7.5 GK800-2T11(B) 11 45 11 Built-in optional GK800-2T15(B) 15 60 15 GK800-2T18.5(B) 18.5 73 18.5 GK800-2T22(B) 22 96 22 GK800-2T30 30 112 30 Externally mounted when needed GK800-2T37 37 144 37 GK800-2T45 45 176 45 GK800-2T55 55 210 55 GK800-2T75 75 288 75 GK800-2T90 90 310(350) 90 GK800-2T110 110 415 110 3.Technical Features of GK800 VFD  Variable Frequency Drive   Technical  features of GK800 VFD Variable Frequency Drive Power input Rated input voltage 3-phase AC208V/220V/230V/240V/380V/400V/415V/440V/460V/480V Rated input current See Section 2.3 in the User Manual Frequency 50Hz/60Hz, tolerance ±5% Allowable range of voltage Continuous voltage fluctuation ±10%, short fluctuation -15%~+10%, i.e. 323V~528V; Voltage out-of-balance rate <3%, distortion rate as per the requirements of IEC61800-2 Power output Applicable motor (kW) See Section 2.3 in the User Manual Rated current  (A) See Section 2.3 in the User Manual Output voltage (V) 3-phase: 0~ rated input voltage, error < ±3% Output frequency (Hz) 0.00~ 600.00Hz; unit: 0.01Hz Overload capacity 150% - 1min; 180% - 10s; 200% - 0.5s Control characteristics V/f patterns V/f control Sensor-less vector control 1 Sensor-less vector control 2 Close-loop vector control (including position control) Speed range 1:100 (V/f control, sensor-less vector control 1) 1:200 (sensor-less vector control 2) 1:1000 (close-loop vector control) Speed accuracy ±0.5% (V/f control) ±0.2% (sensor-less vector control 1 & 2) ±0.02% (close-loop vector control) Speed fluctuation ±0.3% (sensor-less vector control 1 & 2) ±0.1% (close-loop vector control) Torque response < 10ms (sensor-less vector control 1 & 2) < 5ms (close-loop vector control) Torque control accuracy ±7.5% (sensor-less vector control 2) ±5% (close-loop vector control) Starting torque 0.5Hz: 180% (V/f control, sensor-less vector control 1) 0.25Hz: 180% (sensor-less vector control 2) 0Hz: 200% (close-loop vector control) Positioning accuracy ±1 line pulse Basic functions Start frequency 0.00~ 600.00Hz Accel/Decel time 0.00~60000s Carrier frequency 0.7kHz~16kHz Frequency command sources Digital setting + keypad ∧/∨ Digital setting + terminal UP/DOWN Communication Analog setting (AI1/AI2/AI3) Terminal pulse setting Motor started methods Started from starting frequency DC brake then started Speed search started Motor stopped methods Ramp to stop Coast to stop Ramp to stop + DC brake Basic functions Dynamic brake capacity Brake unit threshold voltage: 650V~750V; service time: 0.0~100.0s; brake units of GK800-4T45 and below are    built in or can be built in. See table 2-1 DC brake capacity DC brake start frequency: 0.00~600.00Hz DC brake current: 0.0~100.0% DC brake time: 0.0~30.00s Input terminals 7 digital inputs, one of which can be used for high-speed pulse input. Compatible with active open collectors NPN,    PNP and dry contact input. 3 analog inputs, one of which supports voltage input only, and the other two are voltage/current    programmable. Output terminals One high-speed pulse output terminal, 0~50kHz square signal; can output command frequency, output frequency and so    forth One digital output terminal Two relay output terminals Two analog output terminal,voltage/current programmable; can output command frequency, output frequency    and so forth Encoder signal terminal Compatible with 5V/12V encoder Compatible with different types of encoder signal input, such as open collector, push-pull and differential, etc. Featured  functions Parameter copy, parameter backup, common DC bus, free switchover between two motors’ parameters, flexible parameter displayed & hidden, various master & auxiliary command and switchover, reliable speed search started, a variety of Accel/Decel curves programmable, automatic correction of analog, contracting brake control, 16-step speed control programmable (2 steps support flexible frequency command), wobble frequency control, fixed length control, count function, three faults recorded, over excitation brake, over voltage stall protection programmable, under voltage stall protection programmable, restart upon power loss, skip frequency, frequency binding, four kinds of Accel/Decel time, motor thermal protection, flexible fan control, process PID control, simple PLC, multi-functional key programmable, droop control, asynchronous and synchronous motor parameter identification, field-weakening control, high-precision torque control, V/f separated control, torque control at sensor-less vector control, torque control at close-loop vector control, two encoder signal inputs (support incremental, UVW hybrid and resolver, etc.), flexible deceleration ratio control, zero servo, motor spindle orientation, simple feed forward control, pulse train position control Protection function Refer to Chapter 7 - Troubleshooting Environment Place of operation Indoors, no direct sunlight, free from dust, corrosive gases, flammable gases, oil mist, water vapor, water    dro and salt, etc. Altitude 0~2000m De-rate 1% for every 100m when the altitude is above 1000 meters Ambient temperature -10℃~50℃ Relative humidity 0~95%, no condensation Vibration Less than 5.9m/s2 (0.6g) Storage temperature -40℃~+70℃ Others Efficiency at rated Amps 7.5kW and below: ≥93% 11~ 45kW: ≥ 95%    5kW and above: ≥98% Installation Wall-mounted IP grade  IP20 Cooling method Fan cooled 4.Applications  of GTAKE VFD Variable Frequency Drives (VFDs) Hoists and Cranes Tower cranes Sufficient start torque, fast response  ;  Two motor profiles programmable;  Contracting brake control;                   Overall protection. Bridge cranes Port cranes Construction cranes Passenger elevators Cargo elevators Winches Mine hoists metal Processing   High-speed engraving and milling machines Adequate output torque at low frequency;  Position control modes programmable;  High precision speed control;  Overall protection;  Abundant interfaces and parameter copy function. Machining centers Deep-hole drilling machines Lathes Milling machines Grinding machines Winding and Unwinding Printing machines Intelligent process control;  Specific functions;  Molding control;  Overall protection;  Abundant interfaces and parameter copy function. Packing machine s Plastic puffing machines Wire drawing machines Oil Pump Servo Drives Injection molding machines Precise speed,low current;  Precise ,fast responded PID control;  Hardware and structure. Die casing machines Shoemaking machines Blowing moulding machines Construction machineries 5. With great advantages of high performance, strong starting torque, and strong overload capacity, multiple control techniques, accurate speed control, high reliability, excellent after-sales service, and competitive price, GTAKE provides highly cost-effective VFD Variable Frequency Drives for distributors and agents around the world! Leave me an inquiry for more details like catalog, pricelist, and distributorship~! 6.Comparison of GTAKE brand AC Motor Drives and other common brands