Twin Head Film Blowing Machine

If you are looking for new design,Website:http://www.yuzhe-honghua.com, full automatic twin head film blowing machine, or you are going to import high speed PLC control products from a such factory, or you are planning to check the price with a such golden supplier, with large output twin head film blowing machine for sale and providing with twin head film blowing and printing machine, twin head plastic film blown plant, twin head plastic extrude film blowing machine on promotion, Yuzhe Intl Trading Company is always at your service. Molds of Film Blowing Machine Mold HL-45-600 HL-50-800 HL-65-1000 HL-80-1500 HL-120-3000 Material HDPE, LDPE, LLDPE, Recycling material, Biodegradable material. Max Width 550mm 750mm 1000mm 1500mm 3000mm Screw φ45mm φ50mm φ65mm φ80mm φ120mm L:D 28:1 28:1 30:1 30:1 30:1 Out put 40kg/h 55kg/h 75kg/h 90kg/h 280kg/h Thickness LDPE: 0.001-0.2mm    HDPE: 0.012-0.15mm Extruder 15kw 18kw 30kw 55kw 75kw Total Power 26kw 45kw 55kw 76kw 180kw Main feature and purpose: Along with the widely use of package film and the plastic film products are even more needed by people from day to day. Our factory produce plastic machinery series over 30 years'experience, collect similar machines' characters to produce this machine. The machine is special to blow film ,such as HDPE,LDPE, dissoluble and reproducible plastic.This machine is compact structure, convenient operation, saving space and it is Intelligent facilities to produce plastic film. Step of the Film Blowing: Feeding→plastifying→extruding→blowing out and extensing →cooling and finalizing the design→traction→ traction →rewinding Feeding Process Just the equipment start, put litter material , Until the material is extruded, ensure the machine head is normal and the condition of plastifying is good, then add large quantities of material. Plastifying process After the raw material goes out from the extruder and is heated through preheat section,it plasticizes and is extruded out,then mixed by srew pole,and finally,the granular material  is plastified into melt.  The Extruding out process The fused material output from the screw pole extrudeding out section,which makes the swirl material turn into the advection by the filter screen in the equipment head.Then ,the materialgoes into the spiral machine head and flows into the die opening.At the last it gets into the film tube and extruded out.  Under the certain extruding machine rotating, the instant temperature and the changeless material discharging, the size (width of breadth ) is decided by the ratio of blowing out, which (the times of film’s transversed drafting ) is easily operated under 3 ~ 6 times. The thickness of film is decided by the lengthways drafting time, i.e. The ratio between drafting speed and the extruding speed and normally 3~7 times. If the drafting ratio is too large, the film will be easily broken. Rewinding part This machine has double friction rewinders and cutting device. It could produce the single layer film and double layers rounded film according to clients’ requirements. It could be double rewind in single layer or single rewind in two layers and the film should be rewinded smoothly.   MODEL :HBD-700 Automatic Bag Making Machine No Model HBD-700 1 Max. Width of Bag 600mm 2 Max. Length of Bag 1200mm 3 Bag-making speed 400pc/min 4 Number of strip 1pc 5 Motor power 3kw 6 Gross Weight 1600kg 7 Overall Size(L*W*H) 3600*1500*1950mm