Air-cooled Water Chiller CW-43

Shanghai Coxin Technology Co.,Ltd is one of the best air-cooled water chiller CW-430~800 manufacturers and suppliers in China,Website:http://www.coxintech.com, welcome to buy discount and wholesale low price air-cooled water chiller CW-430~800 from our factory.   Product Name: Air-cooled Water Chiller Model No.:  CW-430~800 Product Introduction A water chiller is an industrial water refrigeration system that cools a process fluid or dehumidifies air in commercial and industrial facilities. The water chiller is a complete water cooling system filled with refrigeration components including a compressor, condenser,evaporator, refrigerant pipes, coolant expansion reservoir, pumps and so on. Our air cooled water chiller offering a free cooling variant and a wide span of cooling capacities from 1.0 to 160KW, it is a good assistant to keep the machine cool and insure the machining accuracy.   Product Features With cooling/heating capacity from 1.0KW~160KW, special requirement is workable; With branded compressor like Copeland/Hitachi/Sanyo etc., running a high effiency of cooling/heating performance; 3.  New micro-computer controller, Chinesse/English language display, fully automatic PLC based units, easy to operate and set; 4.  "fixed temperature" and "room temperature homology type" two control modes, the user can choose according to actual needs; 5.  Environment friendly refrigerant R-407C/R-134a/R-410A, available; 6.  Multiple protection functions, with a variety of fault location display for easy maintenance. Provide passive contact alarm output terminals, coupled with machine control systems to form a closed loop control system, improve the safety of machine control systems; 7.  Both cooling and heating functions, start heating when the oil temperature is below 10 ℃,  stop heating when the oil temperature is up to 15 ℃; 8.  Complete stainless steel of water circulation system, no worries of rust problem; 9.  Compact structure, high efficiency and easy to maintain. Product Application Machinery, electronics, electroplating, metallurgy, construction, chemical, vacuum coating etc.. Product Parameters Product Model CW-430 CW-550 CW-670 CW-800 Cooling Capacity(W) 43000 55000 67000 80000 Heating Capacity(W) 43000 55000 67000 80000 General Power Supply 3P-50Hz-380V Total Power (W) CW-□ 15440 20540 22890 29800 CW-□P 18320 23420 28660 33000 CW-□PT 18320 23420 28660 33000 Total Current (A) CW-□ 31.2 39.0 43.2 52.4 CW-□P/PT 37.4 45.4 56.0 64.3 Temp. Control Range Fixed Temp. Control Type 15~45℃/Differential Temp. Control Type(Room Temp.+T*℃) control accuracy ±1℃ Compressor Power Supply 3P-50Hz-380V Rated Power (W) 13500 18000 20200 24800 Circulating Flow(L /min) 100~150 150~230 Pressure 3~4bar Usage Condition Room Temp.(℃) 5~50 Water Temp.(℃) 5~55 Medium water, water solution and other un-corrosive solution Pipe Size(Female Thread) G1 1/2’’ G2’’ G2’’ G2’’ Tank Volume(L) 300 350 420 500 Protection compressor overload protection*pump overload protection*high/low pressure protection*anti-freeze protection *motor anti-phase and default phase protection *level, flow measurement*malfunction alarm Note 1. The above cooling capacity is based on the condition of ambient temperature 35℃, water inlet temperature 25℃. 2. There are two types of temperature controlling--fixed Temp. control type and differential Temp. control type. Users may choose suitable one according to the requirement. The lower limit value of both types are 15℃ and T*=0~±9℃. 3. CW-□: without water pump and tank; CW-□P: with water pump; CW-□PT with water pump and tank. 4. Heating capacity only for OR type with cooling/heating function, the heating capacity is based on the condition of ambient Temp. 13℃, water inlet temp. 13℃. 5. For any special requirement, pls feel free to contact us. Our Service Cooling the heat! We are professional at industrial cooling solutions, for industrial chillers(oil chiller, water chiller) we can delivery in 1~2 weeks; each unit of chiller is factory tested before delivery. Normally, the package is inner carton & outter plywooden case for exporting shipment; MOQ of 1pc is acceptable; 3D/CAD drawing and technical support also we can provide. Clients’ satisfaction is our pursuit!