Combined Bearings For High Loa

Changzhou Jade-bearing Co.,Ltd is one of the top level CNJDB combined bearings for high loads manufacturers and suppliers in China,Website:http://www.jadebearing.com, welcome to buy cheap combined bearings for high loads from our factory. Adjustable combined bearings with axial support Technical Sheet: table td{ font-size:9px;white-space:nowrap;} CNJDB 2RS           Axialsupport Dimensions Load ratings Speed Mass d mm D mm C mm H mm H1 mm H2 mm D1 mm C1 mm d1 mm S(2) mm @ degrees r mm R mm R1 mm D2 mm d2 mm H3 mm C KN Co KN CA KN CoA KN Grease Rev./min Kg MR.146 MR.146G2 30 62 20 43 33 10 50 16 42 5,5 20° 3 500 500 40 25 22 39 65 10 14 900 0,60 MR.147 MR.146G2 35 70,1 23 48 40 8 57 16 48 6,5 20° 4 500 500 40 25 22 56 93 10 14 900 0,90 MR.148 MR.148G2 40 77,7 23 50,5 39,5 11 61 21 54 7 20° 4 700 700 52 33 28 58 101,5 14 22 800 1,05 (1)  MR.149 MR.148G2 40 78,3 23 45 34 11 61 21 54 7 20° 4 850 700 52 33 28 58 101,5 14 22 800 0,95 MR.150 MR.148G2 45 88,9 30 61 48 13 69,5 21 59 7 20° 3 850 700 52 33 28 84 133 14 22 700 1,70 (1)   MR.151 MR.151G2 50 101,9 28 50,5 37,5 13 77 21 67 7 20° 3 850 700 52 33 28 91 153 18 22 700 1,85 MR.142 MR.142G2 60 107,7 31 69 55 14 82 33 71 8 20° 4 1000 700 74 48 38 94 162 39 57 650 2,40 (1) MR.152 MR.142G2 55 108,55 31 58,5 44,5 14 82 33 71 8 20° 4 1000 700 74 48 38 94 162 39 57 650 2,80 MR.153 MR.142G2 60 123 37 75,8 59,5 16,3 92 33 78 8 20° 4 1000 1000 74 48 38 132 242 39 57 500 4,10 MR.154 MR.154G2 60 149 43 89 69 20 116 50 103 15 15° 4 1000 1000 105 72 !3Cp> 55 179 353 83 131 400 6,80 (1) Taper outer profile (D) (2) Dimension "A" adjustable by means of adapter washers inserted between the main stud and the housing of the axial guide bearing,Adapter washers available with thickness 0,3 - 0,5 - 1 mm Raw Materials: Outer Rings Steel UNI 16NiCr4 casehardened and tempered Final surface hardness 62+/-2 Hrc Inner Rings Steel UNI100Cr6 hardened and tempered Final surface hardness 62+/-2 Hrc Rolling Elements Steel UNI 100Cr6 hardened and tempered Final hardness 62+/-2 Hrc Main Stud Fe52C annealed to be easily welded Axial Support Steel UNI 40NiCrMo4 hardened and tempered Dimensional Tolerances,Clearances,Load Factors: Tolerances According to DIN 620 Tolerance Class P "0". Radial Clearance According to DIN 620 Load Ratings According to ISO 76 and ISO 281