Combined Bearings Adjustable F

Changzhou Jade-bearing Co.,Ltd is one of the top level CNJDB combined bearings adjustable from outside for steel sections manufacturers and suppliers in China,Website:http://www.jadebearing.com, welcome to buy cheap combined bearings adjustable from outside for steel sections from our factory. Combined bearings adjustable from outside for steel sections  Technical Sheet: table td{ font-size:9px;white-space:nowrap;} CNJDB 2RS Dimensions Load ratings Speed Mass d mm D mm C mm Hmin mm Hmax mm H1min mm H1max mm H2 mm D1 mm C1 mm d1 mm s mm @ degrees r mm R mm R1 mm C KN Co KN CA KN CoA KN Grease Rev./min Kg KRES.062 30 62 20 37,5 39 30,5 32 7 50 20 42 2 20° 3 500 500 39 65 14 21 900 0,52 KRES.070 35 70,1 23 44 45,5 36 37,5 8 57 20 48 2 20° 3 500 500 56 93 14 21 900 0,78 KRES.078 40 77,7 23 48 50 36,5 38,5 11,5 61 24 53 2,5 20° 3 700 700 58 101,5 21 32 800 1,02 KRES.089 45 88,9 30 57 59 44 46 13 68 26 59 3 20° 4 700 700 84 133 28 43 700 1,61 KRES.101 (1) 50 101,9 28 46 48,5 33 35,5 13 77 26 67 2,5 20° 4 850 700 91 153 30 35 700 1,75 KRES.108 60 107,7 31 69 71,5 55 57,5 14 82 34 71 3,5 20° 4 1000 700 94 162 33 47 650 2,69 KRES.123 60 123 37 72,3 75,3 56 59 16,3 92 40 80 4,5 20° 4 1000 700 132 242 53 94 500 3,88 KRES.149 60 149 43 78,5 81,5 58,5 61,5 20 116 50 103 4,5 15° 4 1000 700 179 353 68 71 400 6,65 (1) Taper outer (D) Profile Raw Materials: Outer Rings Steel UNI 16CrNi4 casehardened and tempered Final surface hardness 62+/-2 Hrc Inner Rings Steel UNI100Cr6 hardened and tempered Final surface hardness 62+/-2 Hrc Rolling Elements Steel UNI 100Cr6 hardened and tempered Final hardness 62+/-2 Hrc Eccentric Stud Steel UNI 16CrNi4 casehardened and tempered. Final surface hardness 62+/-2 HRc Main Stud Fe52C annealed to be easily welded Dimensional Tolerances,Clearances,Load Factors: Tolerances According to DIN 620 Tolerance Class P "0". Radial Clearance According to DIN 620 Load Ratings According to ISO 76 and ISO 281