100G, 200G DWDM Optical Add-Dr

Description100GHz 200GHz DWDM Optical All-dro Multiplexer utilizes thin film coating technology and proprietary design of non-flux metal bonding micro optics packaging to achieve optical add or dro at a ITU wavelength. It provides ITU channel center wavelength,Website:http://www.sopofiber.com, low insertion loss, high channel isolation, wide pass band, low temperature sensitivity and epoxy free optical path . It can be used for wavelength add/dro in telecommunication network system.Features• Low Insertion Loss• Wide pass band• High Channel Isolation• High Stability and reliability• Epoxy-free on Optical PathApplications• Channel Add/Drop• DWDM Network• Wavelength Routing• Fiber Optical amplifier• CATV fiberoptic SystemPerformance SpecificationsParameterMUX/DEMUXChannel Wavelength (nm)ITU GridCenter wavelength Accuracy (nm)±0.5±0.1Channel Spacing (nm)100200Channel Passband (@-0.5dB bandwidth (nm)>0.22>0.5Pass Channel Insertion Loss (dB)≤1.0≤0.9Reflection Channel Insertion Loss (dB)≤0.6≤0.6Channel  Ripple (dB)<0.3Isolation (dB)Adjacent>30Non-adjacent>40Inertion Loss Temperature Sensitivity (dB/℃)<0.005Wavelength Temperature Shifting (nm/℃)<0.002Polarization Dependent Loss (dB)<0.1Polarization Mode Dispersion<0.1Directivity (dB)>50Return Loss （dB）>45Maximum Power Handling (mW)500Opterating Temperature (℃)-10~+75Storage Temperature (℃)-40~85Package dimension (mm)Φ5.5x34 (L38 for 900um Loose tube)Specifications may change without notice.Above specification are for device without connector.Ordering InformationDWDMXXXXXXX ITUPass ChannelFiber TypeFiber LengthIn/Out Connector1=100G 2=200G01=Ch01 02=Ch02 ……  60=Ch601=Bare fiber 2=900um loose tube1=1m 2=2m 0=None 1=FC/APC 2=FC/PC 3=SC/APC 4=SC/PC 5=ST 6=LCPDF100G, 200G DWDM Optical Add-dro Multiplexer(1x2)