Wood log sawdust pellet line

Introduction of wood sawdust pellet line The wood sawdust pellet line is a whole system automatic production line which suitable for raw materials like: sawdust,Website:http://www.fdsp-cn.com, rice husk, rice straw, cotton stalks, forest wood waste, wood waste and other biomass waste with different capacity. Application of wood sawdust pellet line Today, the biomass energy as a good kind of green, low carbon, environmental-friendly fuel has been used to replac traditional fossil fuels like coal, gas, petrol, etc. 1.Burning in a stove to cook at home; 2.Heat the house, school, hotel, or greenhouse, farm; 3.Used in thermal power plants to replac coal. 4.Used as cat litter to replac clay; 5.Used as horse bedding, or beddings for cow, chicken, dogs, and other animals. Flowchart of wood sawdust pellet line The wood sawdust production line includes material sieving, drying (if the raw material contains too much moisture), wood pellets pelletizing, cooling, screening and packing. Main Machines of complete wood pellet production line: 1. Pre-cleaning( to remove the impurities in the raw materials) 2. Dryer ( dry the raw material to proper moisture before making pellets) 3. Wood pellet mill ( press raw material into pellets) 4. Cooler ( cool down pellets and remove some moisture) 5. Screener (remove dust, and broken pellets) 6. Packing scale (pack pellets into bags of required weight, like 15kg/bag) Main process of wood sawdust pellet line 1.Pre-cleaning process - pre-cleaner To remove the impurities in the raw materials such as stone or some too big materials. Remark: This process is optional. If the raw material is clean, it is not necessary. 2.Drying process - Rotary Dryer The best moisture content to pelletizing is about 12-18%. Our rotary dryer is made up of burning stove and main rotary dryer which is high efficient in drying the wood and biomassmaterial. It can realize to reduce the moisture from 50% to 10%.It is very important for wood pellet plant to using moisture detector which will determine the most suitable moisture before pelletizing. Pelletizing process - Wood pellet mill 3.Wood pellet mill is the heart of the wood pellet production line, and has reliable running performance. It is special designed for compacting of wood, straw, and other biomass sources into pellets. Capacity ranges from 1T to 10T per hour. Our MZLH series Ring die pellet mill is best choice for large scale production. 4.Cooling process - Counterflow cooler Usually after pelletizing, the temperature of wood pellets is between 60-80 degrees and the moisture content is close to 15%. For storage purposes,a cooler must beused to reduce their surface temperature and the moisture content, also help screen good andpure pellets. 5.Packing process - Packing machine After cooling process, the wood pellets will not directly enter into the fuel process, avoiding the wood pellet affected with damp, the packing process is very necessary. The packing process is effectively handled by our Semi-Auto Packing Machine.Remark: We can customize the complete solution as per your raw materials condition and your request for capacity. Features of the sawdust pellet plant ◆It is applicable for biomass materials including wood, bunches, wood shavings, wood chips and so on with size less than 25*25*5mm and moisture content less than 14%. ◆The plant is technical flexibility, when the moisture is below 10%, it can add adequate water to achieve the requirement for pelleting in the process of production. JIANGSU LIANGYOU RENEWABLE ENERGY MECHANICAL ENGINEERING CO., LTD ※ Add:#6 Chenyang Road,Jiangsu Zhongguancun Science and Technology Industrial Park,Liyang,Jiangsu, China ※ Tel: 0086-519-88309988 88308899 　　　0086-519-88309800 88309801 ※ Fax: 0086-519-88309862 ※ E-mail: fdsp@biofuelpelletline.com ※ MSN: fdsp9800@hotmail.com