Non Woven

Thickness control system is the core of the apparatus of the present section. According to product requirements, set the desired thickness of the coating that is weight, and precisely control the uniformity of the coating, printing and embossing is an important basis of the level of quality. The coated rolls each have been sampled, tested its weight and tolerance to combine film and paper-based fastness, qualifier for the next step - the use of the printing section. All samples are required to keep more than a year to prepare for inspection traceability quality complaints. High-temperature oven is evaporated out of the PVC paste viscosity reducing agent volatiles, discharged from the suction system to "clean recovery" in the. Workshop and factory environment is not the slightest contamination. 3, Printing Process and Technology Section Introduction The coated roll sequentially through a plurality of the press bits required on the printed pattern or patterns. Before starting, should be produced in accordance with the product model, put in the position required press printing rollers, deployment of a good paint and inject a certain amount of bits for each color printer slot. Taken by the synchronous trapping tracking system like the first auxiliary will automatically precise control of printing deviation, semi-finished products to ensure quality. 4, embossing and packaging section Process description-printed paper rolls, plastic surface means so softened by high-temperature heating, and then immediately after the embossing roll pressing, then by forced cooling and natural cooling into the quality control and packaging area.