1T wood sawdust pellet product

Wood Pellet Production Line Equipped with professional pellet production line factory, Laizhou Chengda Machinery Co.,Ltd is one of the leading China pellet production line manufacturers. The complete wood pellet processing plant through our research and development is manufactured for produce the wood fuel pellets. Main equipments within it include Crushing process, Drying process, Pelleting process, Cooling and dusting process, Packing process. It has advantages such as compact structure, good appearance, high yield, less consumption, convenient and reliable performance etc. Complete Pellet production line process: (a) Peeling Process Wood debarker machine is applicable to peel the log of MDF board and papermaking industry, it is mainly used to peel log, small wood and so on, the peeled rate is more than 95 percent. (b)Chipping Process In the pellet plant before raw materials are made into biomass pellets, they are first reduced into much smaller, uniformly-sized particles. When the thicknedd is larger than 10mm or the size is greater than 50*50mm, a chippper is needed to chip these materials into smaller pieces. (c)Grinding Process The hammer mill is used to further crush these small pieces into particles of less than 3mm in diameter. (d)Drying Process After raw materials are crushed a dryer is needed since most raw wood materials have a moisture content of about 50%. However, the optimal moisture content for pelletiztion is 13%-15%. Therefore a rotary dryer is included in the pellet plant to reduce the moisture content. After crushing and drying you can begin making wood pellets. (e)Pelletizing Process After crushing and drying the raw material properly it is then ready for the pellet mill. The pelletizing machine or press is the key piece of machinery in the pellet plant. It should be mentioned that impurities in the raw materials like metal or stone,may damage the die and rollers of pellet making machine. (f)Cooling Process Usually after pelletizing, the temperature of pellets is between 60-80 degrees and the moisture content is close to 15%. For storage purpose, a cooler must be used to reduce their surface temperature and moisture content. (g)Packing Process Finally is the packing process. In order to protect the wood pellets becoming getting damp and to increase storability, proper packing is necessary. Features - Top technology with national patent - Customized design and reasonable price. - Non-dust workshop with experienced engineers. - Main machines adopt Siemens motor and imported SKF/NSK bearing. - PLC control(Siemens) and Schneider or Soft Starter electric control system. - Long service time and stable operation. - Guide installation and commissioning is available.