Organoclay Rheological Additiv

Click image to view original image
Price: Negotiable
Min.Order:
Supply
Delivery: Shipment within 3 days since the date of payment
Address: China
Valid until: Never Expire
Updated on: 2016-07-28 10:41
Hits: 516049
Enquiry
Company Detail
 
 
Details
Organic bentonite:YH-908YBModel NO.: YH-908YBClassification: Rheological AdditivesAppearance:White PowderUsage: Paint, Coating,Ink, Grease, Oil DrillingTrademark: YuhongHS Code: 38024909990Package: 25kg kraft paper bagComposition: MontmorilloniteOrigin:Zhejiang ChinaProduct DescriptionYH-908YB is an organo clay (modified benonite), designed for use in solvent based system including intermediate and low polarity polarity range organic liquild. ‍‍Advantages:‍‍1. Exerts gelling efficiency over a wide range of intermediate and low polarity. 2. Easy dispersing.3. The gel is colourless and of high clarity. 4. Produce reproducible thixotropic consistency over a wide temperature range5. Imparts particle suspension, sag resistance without impairing flow and leveling, preventing hard settling of         pigment and fillers. 6. Exerts strong film reinforcing action in organic binder systems. ‍‍Typical Properties:Composition Organic derivative of a montmorillonite clayAppearance                                               Fine white powderMoisture content(105, 2hr)                         ≤ 3.5%Loss on ignition, %(1000)                          ≤35%Density                                            0.53g/cm3Fineness (200 mesh)                                ≥98%Application:1. Transparent coatings, alkyd paint, polyester paint. 2. Drilling fuilds, in diesel based mud. 3. Grease, 4. Ink. 5. sealant. 6. Replacement of fumed silica. ‍‍Using:YH-908YB disperses under high shear and requires a polar activator (30%~40%) for best efficiency. Heat is not required to obtain good dispersion. Addition levels are typically in 0.2%~2.0%. Polar activator (95% Ethanol or 95% Methanol) is needed. Normally addition level of polar activator is recommended to be 30%~40% of DE-34 in weight. Pre-gel procedure is as below. 1. Charge solvent to mill2. Slowly add YH-908YB (8-10% by weight of total pregel) to mill under agitation. 3. Mix at high speed for 5 minutes. 4. Add polar activator. 5. Mix at high speed for 5 minutes. Note: The suggested addition level of our organoclay and polar activator is based on our lab testing. Exact dosage for detail formulation should be based on user's testing.Package:Packed in 25KG Kraft paper bag with PE liner inside and 25kg net weight, special pacakges can be provided upon customers' requirements.Storage:It should be stored in ventilated cool and dry place. With the shelf life of two years. 
Total: 0 [Show All]  Related Reviews
 
More »Our Others Products

[ ProductsSearch ]  [ Add To Favourite ]  [ Tell Friends ]  [ Print Content ]  [ Violation Report ]  [ Close Window ]