Pressure Locked Stainless Steel Grating

Stainless Steel Bar Grating is a kind of open steel structure with its bearing bar & cross bar jonting at intersections either by welding or by locking. Widely used in various types of plant construction and engineering projects. The stainless grating can be made in forms of flat type, tooth type, I type, Light Duty Welded, Heavy Duty Welded, Close Mesh, Pressure Locked, Swage Locked, Riveted Grating and etc.

This type of metal gratings can be divided into following series according to bearing bar sizes:

30mm Bar Grating:

The center to center distance of the steel bar is 30mm. This is the mostly used steel bar grating in various industries. With bearing load is decided by the flat steel bar, this type of bar grating has minimum distances between the load-bearing bars.

Technical Info:

Bearing bar distances: 30mm

Vertical bar distances: 100 mm or 50 mm

Vertical bar distances: 50 mm

40 mm Bar Grating:

The center to center distance of the load-bearing bar is 40 mm. It has light weight compared with the first series, less material. This series of bar grating is used in sites where requires less span distance of the flooring, for example, stair tread, gratings and shelves.

Technical Info:

Vertical bar distance: 100mm

Load-bearing steel bar distance: 40mm

Vertical bar distance: 50 mm.

Grade 316 Stainless Steel Flat Bar Grating

The steel grating must be made of steel. Load bar pitch: 30mm.Cross rod pitch: 100mm.Load bar size: 403mm.Length: 3600mm.Width: 2600mm.

Type: General Purpose, 90 Degree, Material: Carbon Steel, Alloy Type: Low Carbon, Thickness: 1/4", Leg A Length: 4", Leg B Length: 4", Length: 6 Ft, Standard: ASTM A36, Min. Yield Strength (PSI): 36, 000, Typical Hardness (BHN): 137

We also offer Welded Stainless Steel Grating Stair Treads Panels,Stainless Steel Flat Bar Grating.