Switcher HDMI 3X1 2.0v SK-SW20

Shenzhen Yomband Electronics Co.,Ltd is one of the top level China switcher hdmi 3x1 2.0v sk-sw2031w manufacturers and suppliers equipped with professional switcher hdmi 3x1 2.0v sk-sw2031w factory, we are always at your service.Switcher HDMI 3X1 2.0v SK-SW2031WSUN KING (HONG KONG) LIMITEDUHD 3x1 HDMI SwitcherModel No.: SK-SW2031WOperation ManualIntroductionThis is a high performance three HDMI input and one HDMI output switcher.  The system supports all 3D TV formats in addition to all HDTV formats up to 4Kx2K. Furthermore, the remote control gives uses to complete control over the selection of sources and makes the device incredibly user friendly.PackageUHD 3x1 HDMI Switcher------------------------------------------------------------------1Pcs5V/1A DC power adaptor-----------------------------------------------------------------1PcsRemote Control-------------------------------------------------------------------------1Pcs38KHz IR Receiver Cable----------------------------------------------------------------1PcsUser manual----------------------------------------------------------------------------1pcsFeatureCompliant with HDMI2.0, HDCP2.2 and DVI 1.0;Support video format up to 4k2k@30Hz with 24bit RGB/YcbCR 4:4:4/YCBCR 4:2:2, and up to 4k2k@60Hz with 12bit YCBCR 4:2:0;Support 3D frame sequential video format up to 1080p@60;Support high resolution VESA mode video format up to QSXGA@60Hz;Supports LPCM 7.1CH, Dolby TrueHD, and DTS-HD Master Audio;Supports smart auto switch function;Supports IR and Panel button control;SpecificationVideo Bandwidth300MHz/10.2 GbpsInput Ports3 x HDMI (Female type)Output Ports         1 x HDMI (Female type)Output Resolution480i ~1080p50/60, 4Kx2K@24/30, 4k2k@60Hz with 12bit YCBCR 4:2:0, VGA~UXGAESD ProtectionHuman Body model:±8 kV (air-gap discharge)                     ±4 kV (contact discharge)Power Supply 5 V/1A DC Dimensions    64 mm (W) × 155mm (D) × 17 mm (H)                Weight180 g                       Chassis MaterialmetalSilkscreen ColorBlackOperating Temperature 0 °C~40 °C/ 32 °F~104 °FStorage Temperature−20 °C ~ 60 °C/−4 °F ~140 °FRelative Humidity20~90 % RH (non-condensing)Power Consumption2W  Connect and OperateConnect the signal sources such as Blu-Ray Player, Play Station 3, satellite receivers and computers equipped with HDMI output interfaces with a short high-speed HDMI cable to the HDMI Switcher input. Connect the HDMI outputs from the HDMI Switcher to high-definition display devices such as HD-LCD, HD-DLP and HD projectors with HDMI input interfaces. Use high-speed HDMI cables that are recommended for the distances that are required for each connection.The Switcher is powered by an external power supply which is included. Connect power first to the source, then to the Switcher and then to each HD TV or projector.1. POWER LED: This blue LED illuminates when the device is connected with power supply.2. IN LED: These blue LEDs illuminate when the Source selected.3. SERVICE: Manufacturer use only.4. IR: Remote control receiver, the 3.5mm phone for HDMI switcher IR extension.5. INPUT BUTTON: Press this button to selec the input source.1. HDMI IN 1, 2, 3: Connect the input port to the HDMI or DVI output of your source device such as a DVD player or set-top box with HDMI cables.2. HDMI OUT: Connect the HDMI output to an HDMI display.3. DC 5V: Plug the 5V DC power supply into the unit and connect the adaptor to an AC outlet.Remote ControlInput source selec buttons, the panel LED will indicate the input source status .Connection Diagram