Click image to view original image
Horizontal sand suction pump, is the theoretical design of light impurities in two-phase flow pump, is divided into: 200PN-24, 200PN-28, 250PN-15, 250PN-30, 250PN-35, 250PN-40, 300PN-51, 350PN -24,350 PN-31, 350PN-32, 350PN-45, 400PN-26, 450PN-78 type, the pump test after test and industrial operation, with high hydraulic efficiency, wear resistance and good, solid particles contained in the transportation The media performance and stability. The pumps are suitable for inland river dredging, land reclamation of coastal embankments, and coal, mining, power plants and other enterprises transport slurry containing solid particles such as transmission medium concentrations up to 40%, and medium particles up to 50 mm.
Scope:
1. Applicable to inland river dredging, land reclamation of coastal embankments, rivers, reservoirs and lakes to pump mud, sand.
2. Coal, mining, power plants and other enterprises transport slurry containing solid particles such as transmission medium concentrations up to 40%, and medium particles up to 50 mm.
Auxiliary equipment: need to install the emptying device.
structural features: Scope:
1. Applicable to inland river dredging, land reclamation of coastal embankments, rivers, reservoirs and lakes to pump mud, sand.
2. Coal, mining, power plants and other enterprises transport slurry containing solid particles such as transmission medium concentrations up to 40%, and medium particles up to 50 mm.
Auxiliary equipment: need to install the emptying device.
1, mainly by the pump body, impeller, guard, pump cover, brackets and bearing assemblies and other components.
2, pump body, impeller, shield material can be cast iron, cast steel, wear-resistant alloys, and non-metallic wear-resistant materials, the user can be selected when ordering.
3, pump shaft seal packing seal, and in the packing room by adding high-pressure washing water, the better to ensure the normal operation of the pump.
4, the pump is turned counterclockwise from the inlet to see, from the pump discharge inlet to see the right side in the horizontal direction, the outlet as a result of the scene need to be adjusted in the range of 360 degrees.
Materials: Pump casing for ordinary cast iron, cast steel, alloy. Impeller, shield material can be cast iron, cast steel, wear-resistant alloys, and non-metallic wear-resistant materials, the user can be selected when ordering.
