Anti - Corrosion Raised Office Flooring System Removable Recycled Long Life
Description:
HT Office Usage Building Flooring Wiring System Cabling System is made of good quality cold-rolled steel sheet with foaming cement fully filled. The borders of the panel are trimmed with corner-lock holes. Trucking can be placed at any point without cutting floor, much easier for inspecting and repairing. Strong current and weak current can be separated, suitable for all kinds of wires and plug socket terminals.
Application
OA intelligent office building, OA classrooms or places need to be raised, dust-free or waterproof rooms, usually used with square carpet.
Characteristics
- Fireproof class A, moistureproof, dustproof, corrosion prevention
- Convenient for arrange wiring system cabling system
- Avoid the disadvantage that wire which is pre-buried can be aged or short circuit
- High recycled, convenient removing, cost saving, long service life
Technical Paramter
Type | Size | Uniform load | Concentrated load | Rolling load | Ultimate load | ||
0.100/2.5mm DEFLECTION | 10PASS | 10KPAAASS | |||||
FS662 | 500*500*28mm 600*600*35mm 610*610*35mm Standard Type Single Wire Type Dual Wire Type |
14.71 KN/ |
2.94KN | 300KG | 2.45KN | 2.00KN | 8.85KN |
FS800 |
17.78 KN/ |
3.56KN | 363KG | 2.94KN | 2.45KN | 11.25KN | |
FS1000 |
22.22 KN/ |
4.45KN | 454kG | 3.56KN | 2.67KN | 14.50KN | |
FS1250 |
27.78 KN/ |
5.56KN | 567KG | 4.45KN | 3.56KN | 18.36KN | |
FS1500 |
33.34 KN/ |
6.68KN | 680KG | 5.56KN | 4.45KN | 22.17KN | |
Installation Effect
Benefits of Raised Floor
Integrated raised floor for telecommunication, power and air distribution offer several economic and environmental benefits.
- Ease of reconfiguration, and easy access
The integrated raised floor system is engineered to permit fast, easy installation and quick wire and cable changes, enhancing the ability to reconfigure the offices without disrupting power, voice and data services, as well as the air distribution system.Variable Air Volume (VAV) Terminals can be easily added, removed or rearranged to respond to changes in occupancy or heating and cooling loads. Even in workplaces with very low churn rates, constantly evolving technologies in the communications and networking sectors may demand occasional updating of the cabling and wiring systems. These updates are quite simple with raised floor.
- Energy savings
The use of an raised floor plenum for conditional air distribution can significantly reduce energy use in many possible ways, such as a reduced fan power requirement. The underfloor supply plenum with the large cross-sectional flow areas can supply air with very low overall pressure drops.
It also provides higher chiller efficiency. Underfloor systems can use warmer supply air, which permits a warmer cooling coil and warmer evaporator temperature in dry climates.
In mild climates, the use of warmer supply air significantly expands the opportunity to use free cooling or the direct use of outside air, without operating a chiller.
Also, since the airflow is from floor to ceiling, most of the heat generated from ceiling-mounted lights is removed before it can enter the occupied zone. The cooling load is therefore reduced, allowing warmer air to condition the space.
In turn, the concrete slab becomes an active thermal mass, thus reducing temperature swings and peak coolingm requirements, and permitting the realisation of benefits such as night precooling in underfloor air applications.