Click image to view original image
Nylon rod Category:
Colors: white
Its Specifications:
MC stick
Length: 600mm-700mm Diameter ( Φ ) : 20mm-120mm Interval of 5
PA stick
Length: 1m Diameter ( Φ ) : 15mm- 100mm，Interval of 5； 110mm-200mm Interval of 10
Other length and diameter need to be customized.
1. extruded nylon rod
Nylon 6 (White): This material has the most advantageous combination of properties, including mechanical strength, stiffness, toughness, mechanical damping properties and wear resistance. These features, coupled with good electrical insulation and chemical resistance, making nylon 6 become a "universal class" materials for mechanical parts and maintenance of manufactured parts.
PA6 extruded nylon rod, white
Nylon 66 (cream): comparison with nylon 6, its mechanical strength, stiffness, heat and wear resistance, creep resistance is better, but the impact strength and mechanical damping performance, very suitable for automatic lathe machining.
Nylon 4.6 (reddish brown): Compared with ordinary nylon, nylon 4.6 is characterized by a strong rigid preservation, good creep resistance, heat resistance and aging in a wide temperature range. Thus, for nylon 4.6, nylon 6, nylon 66, POM and PET in stiffness, creep resistance, heat aging resistance, fatigue strength and wear resistance with regard mainly the "higher temperature area" (80-150 ℃).
Nylon 66 + GF30 (black): Compared to pure nylon 66, this nylon filled with 30% glass fiber reinforced, the performance of its heat resistance, strength, stiffness, creep resistance and dimensional stability, wear all It has been improved, and its maximum allowable temperature is higher.
Nylon 66 + MOS2 (gray and black): This nylon filled with molybdenum disulfide, compared with nylon 66, its rigidity, hardness and dimensional stability has increased, but the impact strength decreased, the crystalline molybdenum disulfide grain effect of improving the crystal structure of the material bearing and wear resistance are improved.
