Click image to view original image
DEscriptION
DRDE-MAKE SD822 210CM DOUBLE NOZZLE WATER JET LOOM WITH CAM SHEDDING
Main Points To Know about This Set Of Loom...
| Model | SD822 |
| Loom Width | 210cm |
| Reed Width / Actual Weave Width | 120 ~ 200cm |
| Speed | 550 ~ 580 rpm |
| Weft Picks | 5 ~ 40 picks / cm |
| Take-up / Let-off | Mechanical |
APPLICATION
Yarns To Be Used ....
| 1 | Fdy |
| 2 | Dty |
| 3 | Aty |
| 4 | Roto |
| 5 | Cationic |
| 6 | Spun |
| 7 | Spandex |
| 8 | Micro |
| 9 | High Stretch Yarn |
| 10 | Nylon |
| 11 | Viscose |
| 12 | metal Filament |
| 13 | Mono-Filament |
And Following Polyester Fabric (Included But Not Limited) To Be Easily Woven By Our Loom Machine .
| 1 | Polyester Twill Construction |
| 2 | Chiffon Polyester Fabric |
| 3 | Taffeta |
| 4 | Taslon Fabric |
| 5 | Pongee Fabric |
| 6 | Polyester Lining |
| 7 | Crepe |
| 8 | N/P Taffeta |
| 9 | Saree Fabric |
| 10 | Taslan |
| 11 | Micro Peach |
THE MAIN ADVANTAGES OF DRDE WATER JET LOOM
Which Are Also Advisable To You Sirs ….
1. This Shows The Complete System Of Electric Take-Up And Electric Let-Off Of Water Jet Loom . The Introduction And Application Of Electric Take-Up And Let-Off System Has Following Advantages:
1) Avoid Stop Mark ;
2) Provides Variable Weft Pick Change System , It Means No Need To Change Pick Wheel To Change Weft Pick ; With Few Typing On The Touch Screen , The System Will Automatically Convert The New Pick Requested ; And Variable Pick System Is Capable To Change During High Speed , Let’S See From 35 Picks To 45 Picks, Form 45 Picks To 38 Picks Automatically According To Program Design . High Value Fabric Is Therefore Unable To Be Produced .
2. This Part Shown In The Photo, Is Called Tension Bobbin And Warp Guide Bobbin. By The Name, You Sirs Will Easy Understand That Warp Guide Bobbin Will Guide The Warp Forward Continuously From The Warp Beam, Whereas The Tension Bobbin Will Exert Tension On The Warp. With Our Bobbin , They Are First Of All Well Balanced By Motion Pressing, To Ensure There Is An Even Surface; This Will Help To Avoid Broken-Warp Stoppage; Second, Our Bobbin Are Chrome-Plated, To Add More Hardness ; Thus It Will Not Get Depressed When Weaving Fabric / Cloth With More Ends Than 10000 Ends .
3. Rear-Top Support Is The Part Shown In The Above Picture . We Introduced 5-Angle Pipe Type Support To Avoid The Serious Vibration Here . It Is Proven Now That This Design On Water Jet Looms Effectively Reduces The Vibration, Therefore , Enhancing The Leno Assembly Parts Life And Better Gradation Of Cloth Woven .
4. Gears Are Like The Heart To The Weaving Looms . With Every Loom , The Main Motor Generates Motion Power , While The Gears Will Digest And Create Mechanic Motion . This Is Power Source . With DRDE Water Jet Looms , We selec And Use Qt700 Grade Gears Which Is Top Standard Gears . It Is Hard-Worn And Precise Tolerance And Excellent Treatment Same As Gears Used In Automobile Industry , Which Combined Delivers Stable Motion Power To Different Parts Of The Loom .
5. This Is Steel Seat Or Bracket For Leno System . Based On Existing Design , We Enlarged The Width Of Its Bottom , And Increased The Fixture Pad To 3 Pcs . This Two Changes Help To Avoid The Vibration From The Main Structure Transmitted To The Leno System .
6. Mostly , This Reed Protection Lever Is Inside-Main-frame Mounted In Old Model Jw851 Water Jet Looms ; But With Our SD822 Series Water Jet Loom , We Have Made The Improvement Of Install The Reed Protection Lever Outside The frame ; This Change Makes It Easy To Adjust The Lever When Setting New Looms Or Change Quality . Small But Helpful Improvement .
7. Modern Warehousing
Regards
Robert
