Click image to view original image
incoming optical signals into selected output fibers. This is achieved using a patent pending MEMS configuration and activated via an electrical control signal. It uniquely features rugged thermal activated micro-mirror movements instead of rotation, and latches to preserve the selected optical path after the drive signal has been removed.
This novel design significantly reduces packaging requirement, and simplifies driving electronics, offering unprecedented high stability as well as an unmatched low cost.
1x2 MEMS optical switch Features
• High Reliability
• Latching
• Intrinsic tolerance to ESD
1x2 MEMS optical switch Applications
• Channel Blocking
• System Monitoring
• Instrumentation
◇ 1x2 MEMS optical switch Performance
|
Parameters |
MSW-1×2 |
|||
|
Wavelength Range |
nm |
1260～1620 |
||
|
Testing Wavelength |
nm |
1310/1490/1550/1625/1650 |
||
|
Insertion Loss |
dB |
Typ:0.6 ,Max:1.0 |
||
|
Return Loss |
dB |
≥50 |
||
|
Crosstalk |
dB |
≥50 |
||
|
PDL |
dB |
≤0.10 |
||
|
WDL |
dB |
≤0.25 |
||
|
TDL |
dB |
≤0.20 |
||
|
Repeatability |
dB |
≤±0.05 |
||
|
Repeatability Rate |
Hz |
20 |
||
|
Lifetime |
Cycle |
≥109 |
||
|
Switch Time |
ms |
≤5 |
||
|
Transmission Power |
mW |
≤500 |
||
|
Operation Temperature |
℃ |
-5～+70 |
||
|
Storage Temperature |
℃ |
-40～+85 |
||
|
Switching type |
Latching |
|||
◇ 1x2 MEMS optical switch Ordering Information：MSW－1×2－A－B－C－D－E
|
A |
B |
C |
D |
E |
||
|
Mode |
Wavelength |
Fiber Diameter |
Fiber Length |
Connector |
||
|
SM:9/125um |
85: 850nm |
25:250um |
05:0.5m |
OO:None |
||
|
M5: 50/125um |
13: 1310nm |
90:900um |
10:1.0m |
FP: FC/PC |
||
|
M6: 62.5/125um |
14: 1490nm |
15:1.5m |
FA: FC/APC |
|||
|
15: 1550nm |
SP: SC/PC |
|||||
|
162: 1625nm |
SA: SC/APC |
|||||
|
165: 1650nm |
LP: LC/PC |
|||||
|
13/15:1310/1550nm |
LA: LC/APC |
|||||
