Click image to view original image
Bags edge modification is the luggage production process using a very wide range of technology, and luggage edge modification generally refers to the parts and components or parts and parts between the modification, and dyeing edge modification method is one of the tips, then a brief introduction Dyed edge of the edge of the modification of the five steps in the operation.
?
Bags edge modification operation
?
First, cut the edge
Edge trim in the edge of the bag is in accordance with the requirements of cutting edge technology to make the edge more straight, but also to avoid the emergence of flash.
?
Second, from the line
After cutting the edge of the bag, and then is to the starting line of this step, in the starting line before the edge to be cut with an iron or iron in the edge of the line, this can make the edge more clear, but to avoid the leather surface was burned Of the possible.
?
Third, the sand edge
Sand edge is the use of sandpaper grinding edge, will be part of the edge of the villi frosted out, so that the surface smooth and smooth parts.
?
Fourth, staining
Parts of frosted, the luggage components can be dyed, dyeing is required in accordance with the requirements of the color process, the general dyeing temperature is 30 ~ 40 ℃, in order to maintain the color brightness.
?
Fifth, wipe light
Wipe the light on the edge of the components wipe the brightener, repeat 3 to 4 times, each time, after the last one must wait until the oil is completely dry before the light, so to ensure that the edge of the wiping out relatively uniform brightness .
