Industrial Lacquer Spray Booth , Spray Bake Booth For Vehicle Painting Drying

Industrial Lacquer Spray Booth , Spray Bake Booth For Vehicle Painting Drying

 

 

Features

 

1. Economic model.

2. Intake system, exhaust optional.

3. Quality brand name turbo fans, directly drive type

4. Riello diesel burner.

5. Side draft air flow.

 

 

Advantage

 

In painting, outside fresh air comes into the heating generators through the pre-filter system, and enters into the plenum, then filtered by ceiling filter and into the both which brings clean,

symmetrical and steady-going down airflow for spraying,After painting, Hot air goes from heating

generators to plenum, then enters room after filtered by ceiling filter, providing heat that is necessary for baking of items surface. Afterwards, the air with little benzene will be released to the atmosphere after being filtered twice by the exhaust air filter.

 

Item	Detailed Specification
Inside dimension	6900×3900×2650 mm (L×W×H)
Outside dimension	7000×5400×3100mm (L×W×H)
Front door	Folding door, 3 folds, 3000×2600 mm (W×H), without frame, aluminium alloy window frame, red colour, door head and two batten on both sides red colour.
Emergency door	1 units, 650×1800mm (W×H), colour: white.
Basement	No steel basement, exhaust from back side.
Wall panel&roof	Thickness: 50mm, width:1150mm, tongue and groove structure, 0.376mm colour steel with EPS inside, colour: white.
Light	Ceiling Lights: 8Units×4Pcs=32Pcs×36W, with LED, lighting boxes are powered coated.
Intake and Exhaust system	Intake: 1 unit turbo fan, 5.5KW, air capacity: 18000m3/h. Exhaust: Optional
Heating system	Riello diesel burner, stainless steel heat exchanger, G20 diesel burner.
Purification system	Pre-filter, ceiling filter, fibreglass filter.
Control system	Spraying, heat spraying, baking, time setting, lighting switch, failure indicator, temperature controller, power supply switch, emergency stop.
Total power	7KW (Power supply 1×220V, 3×380V, 50HZ)