Plastic Inspection Chamber Pressure Testing Machine

It is used for testing mechanical properties of the inspection chambers and the manholes.
It can take load test for the chamber body and ring-stiffness test, lateral compression test,
ring-tiffness test for the chamber riser. Beside the above tests,
this machine can be also used for various products' external load resistance test.
It is ideal testing equipment for factories, mines, science research department.
 

1. Available standards:

   BS EN13598-1:2003 Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U). polypropylene (PP) and polyethylene (PE) - Part 1: Specifications for ancillary fittings including shallow inspection chambers
   BS EN13598-2:2003 Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U). polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for manholes and inspection chambers in traffic areas and deep under
 

1. Main technical parameters:

Max load: 100kN
Measuring range: 1%--100%
Load resolution:1N
Load measuring accuracy: 1%
Speed accuracy:5%
Load speed: 5-50mm/min
Gate model:4.5m，width1.8m，length :2.5m，Valid test space1.7×1.7×2.7m