Click image to view original image
Wall hung plastic toilet cistern low level for toilet pan and squat
Toilet cistern T002B is featured in elegant design and molded from heavy duty strong polypropylene material. The cistern is fitted with water saving dual flush mechanisms with WRAS approval and a round dual push button of dia. 38mm. Generally speaking, the wall hung toilet cistern is categorized into low level tank for toilet pan or squat. Full set of flush pipes and other installation accessories are included.
Specifications:
| Material: | PP plastic |
| Net weight: | 2550g +/-3% |
| Dimension: | 355mm * 360mm * 105mm (L/W/H) |
| Thickness: | 5mm / 4mm / 3mm |
| Flush volume: | 3/6LPF, 8L max. |
| Working pressure: | 0.02Mpa-1.6Mpa (2.9 psi - 232 psi) |
| Filling rate: | 4.5L/min |
| Noise level: | <=50 DB |
| Flushing rate: | >=2.3 Liters per seconds |
| Actuation force: | <=20N |
| Push button size: | Dia. 38mm |
| Inlet size: | G1/2" |
| Outlet size: | 2NPSM |
| Push button installation: | Top mounted |
| Endurance: | 200,000 times of filling and flush |
Features:
- Made from strong high quality plastic material complied with ROHS.
- Durable molded with a high-gloss finish.
- Water saving.
- Top mounted push button operation.
- Flush pipe set and other installation parts included.
- Silent filling, acoustic comfort.
- Speedy refilling flow (4.5L/min).
- Anti-siphon structure, no back flow.
- Powerful rinsing flow(2.3L/s).
- Top access for maintenance.
Internal Cistern Mechanisms:
Customer’s logo
If you want to have your own logo on the product, you can choose from laser etching, silk printing, adhesive label or mold carving.
Push button and tank lever are the parts exposed to end user. It’s the best place to show your logo or brand name. And the finish of these parts are chrome plated normally. Therefore, laser etching is the best match for this kind of silver finish surface. But please noted, the color of laser etching is always in grey.
If you’re selling the products to DIY markets and need to display the products on shelves, you may need to have the logo printed on the fill valve and / or flush valve, not only on the button or lever. You can consider to use silk printing, especially when you want to use vivid colors.
If you have higher requirements on the logo pattern and color combination, it’s better to choose the label. It’s 4 C color printed adhesive label in any pattern and size you need. Its disadvantage is also easy to see, it could not be long lasting.
The last frequently used way is mold carving. This is a permanent way to carry your logo on the product. But the MOQ will be higher than any other ways as it need to make some revision on the existing molds. Please remember not every position of the product could be carved with your logo. Only some positions is applicable. Please check with our sales team and get further help.
