Click image to view original image
ABS Plastic Toilet Flush Lever / Tank Flush Lever For Flapper Flush Valve
Front mounted toilet lever is a classical model compatible with many single flush toilets. Normally its installed at the left front of the toilet tank body when you face the toilet. The handle is made of high quality solid brass and treated with anti-corrosion chrome plating for long endurance. In most cases, the front toilet lever works with a flapper flush valve and attaches with the pull chain.
Specifications:
| Material: | ABS plastic |
| Net weight: | 45g +/-2% |
| Hole size: | 18*18mm (L/W) |
| Finish: | Chrome plated |
| Position: | Front mounted |
| Rod length: | 210mm |
| Moving range: | 30 degree |
| Handle size: | 50*25*38mm (L/W/H) |
| Actuation: | Manual |
| Mode: | Single flush |
| Application: | Flapper flush valve |
Features:
- Made from premium ABS raw material.
- Stylish and user-friendly design.
- Plastic lever with 3 anchor holes.
- Suitable to be mounted on front of tank.
- High glossy finish.
- Easy to install.
- Three layers high gloss plating, meeting 8H neutral salt spray test.
- Suitable for plastic and ceramic toilet cisterns with a square hole dia.18*18mm in the front of cistern body,(Plastic cistern may need an extra washer to compensate for smaller thickness.)
- Easy access for maintenance.
Product show:
Customer’s logo
If you want to have your own logo on the product, you can choose from laser etching, silk printing, adhesive label or mold carving.
Push button and tank lever are the parts exposed to end user. It’s the best place to show your logo or brand name. And the finish of these parts are chrome plated normally. Therefore, laser etching is the best match for this kind of silver finish surface. But please noted, the color of laser etching is always in grey.
If you’re selling the products to DIY markets and need to display the products on shelves, you may need to have the logo printed on the fill valve and / or flush valve, not only on the button or lever. You can consider to use silk printing, especially when you want to use vivid colors.
If you have higher requirements on the logo pattern and color combination, it’s better to choose the label. It’s 4 C color printed adhesive label in any pattern and size you need. Its disadvantage is also easy to see, it could not be long lasting.
The last frequently used way is mold carving. This is a permanent way to carry your logo on the product. But the MOQ will be higher than any other ways as it need to make some revision on the existing molds. Please remember not every position of the product could be carved with your logo. Only some positions is applicable. Please check with our sales team and get further help.
Quality control
We have strict quality control process and accept no compromise on quality. This is the guidelines executed and abided in our company. As an experienced manufacturers, we attach importance to the critical parts of each model and pay special attention to material source and approval testing. All staff in QC team is well trained before they take up the jobs. Training course of updated standards and customers’ special requirements is scheduled at irregular intervals. Meanwhile, advanced testing equipments and devices are introduced to our production line and laboratory to ensure accurate and efficient feedback control.
