Click image to view original image
Features
1.Competitive price for quality
2. Ten years manufacturing experience
3.One of the Leader of Smt machine manufacurers in China
Specification
1. Heating system adopts Leadsmt Patent Heating technology .
2.Hot air no-contact output supported by imported large current solid-state relay ,safe and reliable ,meanwhile equipped with special SSR radiator ,greatly improve the cooling efficiency,enjoy loner lifetime of the machine.
3. Heating devices used high quality imponents,ensure the whole system goes smoothly .
4. Combined with temperature controller PID fuzzy control function,has been monitoring the change of the ambient temperature and heat value ,with the minimum pulse control heating device , fast response, guarantee the temperature control precision ,minimize temperature distribution differences inside the oven ,the length direction of the temperature distribution accords to IPC STANDARDS .
5. Heating zone Module design ,convenient for maintenance .
6. Sound and Light alarm when the temperature beyond the limit, with error analysis function .
7. With small hot air cycle system design ,up and down heating ,good thermal compersation ,perfect hot source efficiency ,warm-up fast ,suitable for BGA ,CSP and 0201 ect ,components solder welding .Unique forced hot air cycle structure ,make components on PCB heated evenly .
8. Winding system adopts advanced wind air channel, working uniformly ,with high hot source exchange .
9. Pre-heating zone, welding zone, cooling zone, cooling zone, up and down heating separately ,independent cycle and temperature control ,adjacent/beside zone temperature difference maximum value can reach 100 ℃. No temperature exchange between zones, each zone temperature and wind speed can be adjusted.
10.imported high temperature resistant motor straightly drive the hot air recycle, good heating balance, run smoothly,long life time, low noise, shock less .
11. Zones power match properly, warm-up fast, from room temperature to working temperature need 20 minutes, with hot source compensation functions.
12. Independent cooling zone ,ensure the low temperature when PCB come out .
13. Transmission system adopts Japanese Frequency Motor,combined with 1:150 imported turbine reducer, running stably, the speed at 0-1500mm/min is adjustable.
14. Standing supported by independent wheels, with special stainless steel mesh belt,durable wearing
resistant, especially for BGA, CSP and 0201 welding .
15. Rail + mesh belt transmission optional .
|
Model |
JAGUAR A8 |
|
GENERAL |
|
|
Outside dimension |
42007001320mm |
|
Standard color |
Computer grey |
|
Weight |
800kg |
|
Number of heating zones |
Up8/bottm8 |
|
Lengthof heating zones |
2800mm |
|
Number of cooling zones |
1 |
|
Standard feature of control system |
|
|
Electric supply required |
5line, 3phase, 380V 50/60Hz |
|
Warming time |
Approx. 20minute |
|
Heating pattern |
Up: Hot air, Bottom: IR |
|
Temp. setting range |
Room temp--300degree |
|
Control system |
PID+SSR or PLC+ Computer |
|
Temperature control method |
PID close loop control & SSR driving or PLC +PC |
|
Temperature control precision |
± 1.0 degree |
|
Temperature deviation on PCB |
± 2.0 degree |
|
Data storage |
Process data and status storage (80GB) |
|
Abnormal alarm |
Abnormal temperature(extra-high/extra-low temp) |
|
Board dropped alarm |
Tower light: yellow warming: Green-normal: Red-abnormal |
|
Standard features of conveyor system |
|
|
Max. width of PCB |
Max: 320mm |
|
Conveyor height |
Light → right(option: R→ L) |
|
PCB transmission agent |
mesh |
|
Conveyor height |
880± 20mm |
|
Conveyor speed range |
0~1000mm/min |