Click image to view original image
Titanium is a new type of metal, the performance of titaniuim is related to the content of carbon,nitrogen ,hydrogen and oxygen.The pure titanium iodide impurity content less than 0.1%,but its strength,high performmance plastic .99.5% pure titanium is :the density of (ρ)is 4.5g/cm3,the melting point of 172 silicon titanium alloy wear-resisting flooring 5℃，coefficient of heat conductivity is 15.24w/(m.k),tensile strength b id 539mpa ,elongation is 25%,section shrinkage of PSI is 25%,elastic modulus e is 1.078X105Mpa,hardness hb195
Titanium Characteristic:high intensity、high thermal strength、good corrosion resistance 、good low temperature performance 、chemical active.
1、Titanium rod specifications:
Titaniuim rod specififcations:Titanium and titanium alloy bar light、titanium alloy bar、titanium profiled、titanium square rod 、titaniuim shaft 、titanium stirring shaft 、titanium screw.
The chemical composition of titanium alloy bar should be consistent with provisions of GB/360.1,buyer the reinspection , the chemical compsosition of the devition should be allowed meet the provisions of GB/T3620.2.
2、Titanium rod production :
National standard of titanium :TA1、TA2、TA3、TA7、TA9、TA10、TC4、TC4ELI、TC6、TC9、TC10、TC117、GR12、A221
3、Performance standards for titanium rods:
Titaniuim rods standrads of GB,GB/2965-2965,GB/T13810,Q/BS5331-91.
American standard ASTM B348,ASTM F136,ASTM F67,AMS4928
The sign:GR1、GR2、GR3、GR5、GR
