titnaium alloy sheet

tianium  is a new type of metal,the performance of titanium is related to the content of carbon ,nitroben,hydrogen and oxygen.The pure titanium  iodide  imipurity  content  less than 0.1%,but its low  strength ,high performance plastic.99.5%pure titaniuim is :the density of (ρ) is4.5g/cm3,themelting point of 172 silicon  titanium  alloy  wear-resisting  flooring  5℃，coefficient  of  heat conductivity  is 15.24w/(m.k),tensile  strength b  is  539mpa ,elongation  is  25%,section  shrinkage of PSI  is 25%,elastic  modulus  e  is 1.078X105Mpa,hardness  hb195
Titanium  Characteristic :high  intensity,high  thermal  strength,good corrosion resistance、good low temperature performance、chemical active.


The supply of titanium plate thickness:0.3mm-30mm
Perennial  supply  grade:TA1、TA2、TC4
Cutting :cutting machine,water  cutting ,wire cutting
We  solemnly promise :reliable quality,genuine goods  at  a  fair price.Titanium plate there atr  two  kinds   of   performance  standards:
GB/T3621-2007,GB/T13810-2007;B265ASTM F136
American  Standard  is ASTM,ASTM,F67.AMS4928.
1、Material  trademark:
The  sign  of American:GR1、GR2、GR3、GR5、GR7、GR12
The  sign of Russian:BT1-00、BT1-0、BT1-2ect
Domestic  brands:TA0、TA2、TA3、TA5、TA6、TA7、TA9、TA10、TB2、TC1、TC2、TC3、TC4
reference  to standard:
(1)GB228metal  tensile experiment  method
(2)GB/T3620.1Titanium  and titanium allouy and  chemical  composition
(3)GB/T3620.2Titanium  and titnaium alloy  processing  product  chemical  composition   and  allowable deviation.
(4)GB4698Sponge  titanium ,titanium and iron alloy chemical  analysis method.Titanium plate production specifications:
T0.5-1.0mmXW1000mmXL2000-4000mm
T1.0-5.0mmXW1000-1500mmXL2000-3500mm
T5.0-30mmXW1000-2500mmXL3000-6000mm
T30-80mmXW1000mmXL2000mm
2、Titanium plate production  status:
Hot  working state(R)Cold working state(Y)annealed  condition (M)
3、Titanium plate manufacturing  process:
Hot  forging  process  in  metal above the recrystallization  temperature
Hot  rolled  under  the  above  the  recrystallization  temperature  of  the  rolling  process.
Cold  plastic  deformation  temperature  is  lowe  than the temperature  of  the  rolling  process.
4、The  characteristics  of  titanium  plate :
(1)Titanium  plate surface  oxide  film  is  equivalent  to  a  good  durability  with  separating  agent,using  titanium  plate saves separating  agent ,so  the  plate  is easy  to  peel,eliminates  the  process  of   plate  pretreatment,titanium  plate to light than copper plate.
(2)Half  titanium plate is the liffe  of  a copper plate more than 3 times ,according  to  the  operating  conditions of up to 10to20years  with.
(3)Compact  crystal copper titanium plate making,smooth  suface,good quality.
(4)Because  of  titanium  plate without smearing  separating  agent,which  can  aviod  the  pollution.
(5)Increase  in  copper  electrolyte lower  the  production  of lelctroytic copper production  costs,which  have  good economic  benefits.