Click image to view original image
Titanium is a new type of metal ,the performance of titanium is related to the content of carbon ,nitrogen,hydrogen and oxygen.The pure titanium iodide impurity content less than0.1%,but its low strength,high performance plastic .99.5%pure titanium is :the density of (ρ）is4.5g/cm3,the melting point of 172 silicon titanium alloy wear-resisting floorinig 5℃，coefficient of her conductivity is 15.24w/(m.k),tensile strength b is 539mpa,elongation is 25%,section shrinkage of PSI is 25%,elastic modulus is 1.078*105Mpa ,hardness hb195
Titanium Characteristic :high intensity 、high thermal strength、good corrosion resistance 、good low temperature performance 、chemical active .
The supply of titanium plate thickness:0.3mm-30mm;
Perennial supply grade:TA1 TA2 TC4
Cutting:cutting machine .water cutting ,wire cutting ;
We solemnly promise :reliable quality ,genuine goods at a pair price.Titanium plate there are two kinds of performance standards:
GB/T3621-2007,GB/T13810-2007;B265 ASTM F136
American Standard is ASTM,ASTM,F67.AMS4928
1、Grade:
American Standard grade:GR1、GR2、GR3、GR5、GR7、GR12
Russian Standard grade:BT1-00、BT1-0、BT1-2ect.
Nation Standard grade:TA0、TA2、TA3、TA4、TA5、TA6、TA7、TA9、TA10、TB2、TC1、TC2、TC3、TC4
Application standard:
1:GB 228 metallic materials tensile testing at ambient temperature.
2:GB/T3620.1titanium and titanium alloy and chemical composition .
3:GB/T3620.2chenmical components and components of titanium and titanium alloys are allowed to be misaligned.
4:GB4698chemical analysis method of titanium sponge,titanium ferroalloy .
Titanium plate production specification :
T0.5-1.0mm×W1000mm×L2000-4000mm
T1.0-5.0mm×W1000-1500mm×L2000-3500mm
T5.0-30mm×W1000-2500mm×L3000-6000mm
T30-80mm×W1000mm×L2000mm
2、Titanium plate production status:
Hot working state (R) Cold working state(Y)
annealed condition (M)
3、Titanium plate manufacturing process：
Hot forging process in metal above the recrystallization temperature.
Hot rolled under the above the recrystallization temperature of the rolling process.
Cold plastic deformation temperature is lower than the temperature of the rolling process.
4、The characteristics of titanium plate :
(1)Titanium plate surface oxide film is equivalent to a good durability with separating agent,using titanium plate saves separatinig agent ,so the plate is easy to peel,eliminates the process of plate pretreatment,titanium plate to light than copper plate .
(2)Half titanium plate is the life of a copper plate more than 3 times,according to the operating conditions of up to 10 to 20years with.
(3)Compact crystal copper titanium plate making ,smooth surface,good quality.
(4)Because of titanium plate without smearinig agent,which can avoid the pollution.
(5)Increase in copper electrolyte lower the production of electroytic copper production costs,which have good economic benefits.
