Click image to view original image
Titanium is a new type of metal ,the performance of titanium is related the content of carbon,nitrogen,hydrogen and oxygen .The pure titnaium iodide impurity content less than 0.1%,but its low strength ,high performance plastic.99.5%pure titanium is :the density of (ρ)is4.5g/cm3，the melting point of 172silicon titanium alloy wear-resisting flooring 5℃，coefficient of heat conductivity is15.24w/(m.k),tensile strength b is 539mpa,elongation is 25%,section shrinkage ofPSI is 25%,elastic modulus is /T13810-2007;B265ASTM F136
.1.078*105Mpa,hardness hb195.
Titanium Characteristic:high intensity、high thermal strength 、good corrosion resistance 、good low temperature performance 、chemical active.
The supply of titanium plate thickness :0.3mm-30mm;
Perennial supply grade:TA1 TA2TC4
Cutting :cutting machine ,water cutting ,wire cutting ;
We solemnly promise :reliable quality,genuine goods at a fair price.Titanium plate there two kinds of performance standards:
GB/T3621-2007,GB/T13810-2007;B265 ASTM F136.
American Standard is ASTM,ASTMF67.AMS4928.
1、Grade:
American Standard grade:GR1、GR2、GR3、GR5、GR7、GR12
Russian Standard grade:RT1-00、BT1-0、BT1-2ect.
Natioan Standard grade:TA0、TA2、TA3、TA5、TA6、TA7、TA9、TA10、TB2、TC1、TC2、TC3、TC4
Application standard:
1:GB 228 metallic material tensile testing ambient temperature .
2:GB/T3620.1titanaium and titanium alloy and chemical composition
3:GB/T3620.2chenmical components and components of titanium and titanium alloys are allowed to be misaligned.
4:GB4698 chemical analysis method of titanium sponge,titnaium ferroalloy.
Titanium plate production specification :
T0.5-1.0mm×W1000mm×L2000-4000mm
T1.0-5.0mm×W1000-1500m×L2000-3500mm
T5.0-30mm×W1000-2500mm×L3000-6000m
T30-80mm×W1000mm×L2000mm
2、Titanium plate production status:
Hot working state(R) Cold working state (Y) annealed condition(M)
3、Titaium plate manufacturing prcess:
Hot forging process in metal above the rectystallization temperature.
Hot rolled under the above the recrystallization temperature of the rolling process.
Cold plastic deformation teperature is lower than the temperature of the rolling process.
4、THe characteristics of titaniuim plate:
(1)Titanium plate surface oxide film is equivalent to a good durability with separating agent,usinig titanium plate saves separating agent ,so the plate is easy to peel,elimimates the process of plate pretretment ,titanium plate to light than copper plate .
(2)Half titanium plate is the life of a copper plate more than 3 times ,according to the operating conditions of up to 10 to 20years with .
(3)Coompact crystal copper titianiuim plate making ,smooth surface,good quality.
(4)Because of titnaium plate without smearing separating agent ,which can avoid the pollution .
(5)Increase in copper electrolyte lower the production of electrolytic copper production costs,which have good economic benefits.
