titanium alloy rod

    Titanium  is  a new  type of metal ,the performance  of titanium is related to the content of carbon ,nitrogen,hydrogen  and oxygen ,The  pure titanium iodide impurity content less than 0.1%,but its low strength ,high performance plastic .99.5% pure titanium is :the density of (ρ)is 4.5g/cm3,the melting point  of 172silicon titanium alloy wear-resisting flooring 5℃,coefficient of heat conductivity is 15.24w/(m.k),tensile strength b is 539mpa ,elongation  is 25%,section sgrinkage of PSI is 25%,elastic  modulus e is 1.078*105Mpa ,hardness hb195.


1、Titanium rod   specifications:
titanium  rod specifications:titanium and titanium alloy bar light ,titanium alloy bar ,titanium  profiled ,titanium square  rod ,titanium shaft,titanium stirring shaft,titanaium screw.
The cheical  composition of titanium alloy bar should be consistent with provisions  of GB/3620.1,buyer the reinspection ,the chemical   composition  of the devition should be  allowed meet the provisions  of GB/T 3620.2



2、TIitaniuim  rod  production :
National  standard of titanium :TA1，TA2，TA3，TA7，TA9，TA10,TC4，TC4ELI,TC6,TC9,TC10，TC117,GR12,A221.


3、Performance  standards  for titanium rods:
Titanium rods standards of GB,GB/2965-2965,GB/T13810,Q/BS5331-91;
American standard  ASTM B348,ASTM F136,ASTM F67,AMS4928.
The  sign:GR1,GR2,GR3,GR5,GR