Click image to view original image
Titanium is a new type of metal ,the performance of titanium is related to the content of carbon ,nitrogrn ,hydrogen and oxygen .The pure titanium iodide impurity content less than 0.1%,but its low strength,high performance plastic .99.5%pure titanium is :the density of (ρ)is 4.5g/cm3,the melting point of 172silicon titanium alloy wear-resistinig floorinig 5℃，coefficient of hea conductivity is 15.24w/(m.k),tensile strength b is 539 mpa ,elongation is 25%,section shrinkage of PSI is 25%,elastic modulus e is 1.078*105Mpa ,hardness hb195.
Titanium Characterisitic :high intensity ,high thermal strength ,good corrosion resistance ,good low temperature performance .chemical active .
Titanium alloy density is about 4.5g/cm3,only 60%of steel ,the strength of pure titanium was close to ordinary steel strength ,high strength titanium alloy than many alloy structual steel strength .There fore titanium alloy strength (strength/density)is much larger than other metal structure materials ,see table ,can be produced the unit has high strength ,good rigidity ,light quality zero components.The engine component ,the plane frame ,skin,fasteners and landing gear and so the use of titanium alloy.
The supply of titanium palte thickness :0.3mm-30mm
Perennial supply grade :TA1 TA2 TC4
Cutting :cutting machine ,water cutting ,wire cutting ;
We solemnly promise :reliable quality ,genuine goods at a fair price .Titanium plate there are two kinds of performance standards:
GB/T3621-2007,GB/T13810-2007;B265 ASTM F136
American Standard is ASTM,ASTM F67,AMS4928
1、Grade :
American Standard grade : GR1,GR2,GR3,GR5,GR7,GR12
Russian Standard grade :BT1-00,BT1-0,BT1-2ect.
National Stanard garde :TA0,TA2,TA3,TA5,TA6,TA7,TA9,TA10,TB2,TC1,TC2,TC3,TC4
Application standard:
1:GB 228 metallic materials tensile testing at ambient temperature .
2:GB/T3620.1titanium and titanium alloy and chemical composition
3:GB/T3620.2chemical components and components of titanium and titanium alloys ars allowed to be misaligned.
4:GB4698 chemical analysis method of titanium sponge ,titanium ferroalloy .
Titanium plate production specification:
T0.5-1.0mm*W1000mm*L2000-4000mm
T1.0-5.0mm*W1000-1500mm*L2000-3500mm
T5.0-30mm*W1000-2500mm*L3000-6000mm
T30-80mm*W1000mm*L2000mm
2、Titanium plate production status:
Hot working state (R) Cold working state (Y) annealed condition (M)
3、Titanium plate manufacturing process :
Hot forging process in metal above the recrystalltion temperature .
Hot rolled under the above the recrystalliaztion temperature of the rolling process
Cold plastic deformation temperature is lower than the temperature of the rolling process.
4、The characteristics of titanium palte :
(1)Titanium plate suface oxide film is equivalent to a good durability with separating agent ,using titanium plate saves separating agent ,so the palte is easy to peel,elimainates the process of plate pretreatment ,titanium palte to light thancopper plate .
(2)Half titanium plate is the life of a copper plate more than 3 times ,according to the operating condidtions of up to 10to 20years with
(3)Compact crystal copper titanium plate making ,smooth surface ,good quality.
(4)Because of titanium plate without smearing separating agent ,which can avoid the pollutioin.
(5)Increase in copper electrolyte lower the production of electrolytic copper production costs ,which have economoc benefits.
