titanium bar

    Titanium  is  a new type of metal ,the performance of titanium is related to the content of carbon,nitrogen ,hydrogen and oxygen .The pure  titanium iodide impurity content less than 0.1%,but its low stength .high performance  plastic .99.5%pure titanium is :the density of (ρ)is4.5g/cm3,the melting point of 172 silicon titanium alloy wear-resisting  flooring 5℃,coefficient of heat conductivity is 15.24w/(m.k),tensile strength b is 539mpa,elongation  is 25%.section shrinkage of PSI is 25%,elastic modulus e is 1.078*105Mpa ,hardness hb 195.

Titanium  Characterisitic :
high intensity ,high thermal stength ,good corrosion resistance ,good low temperature performance ,chemical active .

Titanium  alloy  density  is about 4.5g/cm3.only 60%of steel ,the strength of pure titanium was close to ordinary steel strength ,high strength titanium alloy than many alloy structural steel strength .Therefore titanium alloy strength (strength/density)is much larger than other metal stricture materials,see table ,can be produced the unit has high strength ,good rigidity ,light quality zero components .The engine component ,the plane frame ,skin ,fasteners and landing gear  and so the use of titanium alloy .

1、TItanium rod specificatioins:
Titanium rod specifications:Titanium and titanium alloy bar light ,titanium alloy bar ,titanium profiled ,titanium square rod ,titanium shaft,titanium stirring shaft ,titanium screw.
The chemical composition of titanium alloy bar should be consistent with provisions of GB/3620.1,buyer the reinspection,the chemical composition of the devition should be allowed meet the provisions of GB/T3620.2