Galvalized Wire Production Line

Galvanized production line equipment
1, design conditions
Product Type: low, medium and high carbon steel wire;
Wire diameter range: fine wire 0.7 ~ 1.5, the general wire 1.5 ~ 5.0;
Steel zinc layer thickness: 40 ~ 80g / ㎡ oblique plating, 180 ~ 300g / m2, vertical plating;
Number of wires: 12 to 40 lines;
DV value: 35 ~ 70;
Production range: 1000 ~ 20000 tons / year.
2, the general process
Hot Plating:
Stripping → Annealing (low carbon steel wire is annealed, high carbon steel wire is skimmed) → washed → pickling → washing → washing → drying → hot-dip galvanizing → wiping → cooling →
plating:
Line → annealing (degreasing) → washing - pickling - cleaning → electroplating → hot water washing → drying → line
3, the production line features:
According to customer requirements, design a variety of specifications, the form of galvanized steel wire production line to meet customer needs for a variety of investment, rapid recovery costs.
Sizes: From 1.0 Mts long x 0.8 Mts Wide x 0.8 Mts deep
Up to 15 Mts long x 2.0 Mts Wide x 2.0 Mts deep.
 
Features:
◆ One part "long life" ceramic lining - 10 to 20 years working life
Thick ceramic lining to cause freezing of zinc in the event of cracking
◆ Ridged steel body to ensure total support for the ceramic lining.
◆ Insulation to give max. 40 ° c on outer decorative metal skin.
◆ Choice of electric, gas or oil heaters
◆ Needs only a concrete floor and connection to services
 
The absence of iron in the ceramic lining makes it practical to run a:
◆ Low dross galvanizing system when the kettles are used with the Gongda Galvanizing pre-flux iron reduction equipment.
◆ Zero dross galvanizing system when the kettles are used with the Gongda Galvanizing patented pre-flux system