Click image to view original image
Big space between tie bars Energy Saving Injection Molding Machine 140 tons with servo system
Compared with normal injection machine,servo injection molding machine can save 20% -80% power under same status.
Low noise electric motor;
Low noise pump (gear pump);
Fast response of 0.05 seconds;
Low water consumption (because the system will not be pressurized into phases of the process);
Low maintenance electrical and hydraulic;
Power consumption reduction of up to 80% depending on the cycle, the machine begins to save energy when the the cycle exceeds 18seg;
Accuracy in movement;
| Injection Unit | A B C |
| Screw Diameter mm | 38 42 45 |
| Screw L/D Ratio L/D | 22.1 21.6 19.5 |
| Shot Size (Theoretical) cm3 | 193 227 278 |
| Injection Weight (PS) g | 176 206 252 |
| Injection Rate g/s | 94 105 135 |
| Injection Pressure Mpa | 205 159 140 |
| Screw Speed rpm | 0-220 |
| Clamping Unit | |
| Clamp Tonnage KN | 1400 |
| Toggle Stroke mm | 380 |
| Space Between Tie Bars mm | 420*420 |
| Max.Mold Height mm | 450 |
| Min.Mold Height mm | 170 |
| Ejector Stroke mm | 120 |
| Ejector Tonnage KN | 33 |
| Others | |
| Max.Pump Pressure Mpa | 16 |
| Pump Motor Power KW | 13 |
| Heat Power KW | 7.2 |
| Machine Dimension m | 4.5*1.2*1.7 |
| Machine Weight t | 4.2 |
The Injectiond machine is controlled via Micro Processor with PLC Techmation Taiwan brand.
Using the A63versions with display of 12 ", with touch screen in Portuguese language with easy operation with the following characteristics:
- Temperature Control type "PID"
- Weekly Schedule
- Control to maintain low temperature, when the injection is stopped
- Internal storage memory to 50 molds.
- Fault diagnostics with alarm messages
- Low power consumption
- Digital Back Presure, via PLC
