Click image to view original image
PVC pipe fitting injection molding machine shot weight 120 grams clamping force 118tons
PVC pipe fitting injection molding machine,
1. The Characteristic Of HAIJIA PVC pipe fitting Special Machine
There is fast response with less than 0.1 second and high repetition precision & linearity less than 0.1%.
Alternative air cool hydraulic radiator used for model less .
Hybridizing and uniting hydraulic-mechanism-electric into mono driving system creating and performing unique stable precision of system pressure close loop control.
The system reimbursing feature absolute away hydraulic driving varieties from the temperature factor.
Hydraulic flow close loop control actuating desired machine functions through RPM controlled pump system and limited the hydraulic surge supplying during low speed functioning.
Saving Energy & Low Noise Fixed rotation speed output in accordance with actual flow requirement. Very low energy consumption while machine idles.
Power saving is obvious without vain work. Oil temperature is not getting up and parts life become longer.
| Injection Unit | A B |
| Screw Diameter mm | 32 36 |
| Screw L/D Ratio L/D | 21.5 19.8 |
| Shot Size (Theoretical) cm3 | 101 123 |
| Injection Weight (PS) g | 91.9 111 |
| Injection Rate g/s | 70 82 |
| Injection Pressure Mpa | 16 |
| Screw Speed rpm | 0-220 |
| Clamping Unit | |
| Clamp Tonnage KN | 800 |
| Toggle Stroke mm | 275 |
| Space Between Tie Bars mm | 315*315 |
| Max.Mold Height mm | 320 |
| Min.Mold Height mm | 120 |
| Ejector Stroke mm | 80 |
| Ejector Tonnage KN | 27 |
| Others | |
| Max.Pump Pressure Mpa | 16 |
| Pump Motor Power KW | 9 |
| Heat Power KW | 5.3 |
| Machine Dimension m | 3.5*1.2*1.6 |
| Machine Weight t | 5 |
PVC pipe fitting injection molding machine,hydraulic components of eurpean and american brands with different circuit design ensure locking fast,low nosie,shortent the molding cycle,improve production efficiency
