Click image to view original image
Plastic crate injection molding machine clamping force 530 tons production speed 2 pcs per shot
1. The Characteristic Of HAIJIA Special Machine
Built according to international standards and Euromap NBR
- Linear potentiometric (Injection, Puller and Lock)
- 03 (three) three-pole sockets for connecting peripherals
- Pre-arrangement for Robots
- Mechanical, Electrical and Hydraulic devices in accordance with Brazilian security standards NR-12
- Security System against whipping hoses
- Oil Collectors
- Injection system driven by two cylinders
- Injection unit with lateral movement for maintenance and exchange of screw and barrel
- Automatic adjustment of molds height
- Electrical safety switch
- Clamping set for fixing the molds
- Vibra Stop set
- Set of emergency spare parts (resistors, tip, rings and thermocouples)
- Tool set for small repairs and specific additional tools for the machine
- Manyfold for water distribution
| Injection Unit | A B |
| Screw Diameter mm | 80 85 |
| Screw L/D Ratio L/D | 21 20 |
| Shot Size (Theoretical) cm3 | 1965 2218 |
| Injection Weight (PS) g | 1788 2018 |
| Injection Rate g/s | 442 499 |
| Injection Pressure Mpa | 130 |
| Screw Speed rpm | |
| Clamping Unit | |
| Clamp Tonnage KN | 5300 |
| Toggle Stroke mm | 770 |
| Space Between Tie Bars mm | 820*800 |
| Max.Mold Height mm | 810 |
| Min.Mold Height mm | 330 |
| Ejector Stroke mm | 240 |
| Ejector Tonnage KN | 150 |
| Others | |
| Max.Pump Pressure Mpa | 16 |
| Pump Motor Power KW | 45 |
| Heat Power KW | 31.4 |
| Machine Dimension m | 8.4*1.92*2.76 |
| Machine Weight t | 20 |
plastic crate injection molding machine,hydraulic components of eurpean and american brands with different circuit design ensure locking fast,low nosie,shortent the molding cycle,improve production efficiency
