Click image to view original image
Specifications:
Material: Synthetic Material
Thickness: 9mm
Width range: 1000mm - 3200mm
Heat resistance :220℃
Weight : 7.5kg/㎡
Suitable speed：≤ 250m/min
Feature of High Speed Corrugator Belt:
High absorption of moisture and low noise
Suitable for averange liner machine speed
Longlife time running
Suitable as top belt and bottom belt
Different Joint For Corrugator Belt
Hot Clipper Lacing With Flocking Clipper With Rubber Coated
How To Cleaning Maintenance Of Corrugator Belt?
It is better to thoroughly clean the corrugator belt once time per month. Here are some detail steps:
1. Keep the machine running with slow speed;
2. Make the corrugator belt fully moist by water or low pressure steam spray with
much water content;
3. Put into some detergent and clear up the dirt & paste scar with soft brush;
4. After cleaning,using water to wash the belt again;
5. During the washing process,it will be greatly help to lay out shallow U-shaped
iron plate or shallow groove under the corrugator belt.It will make the cleaning
water flow out to the machine outside,keep the heating panel clear and no
any corrosion;
6. When necessary, you can turn on steam to heat the heating panel and make the
wet corrugator belt drying with slow speed.
Contact Us Now:
team5@huataogroup.com
Tel:0086-0311-80690567
Mobile（whatsapp/wechat): 0086-17732852675
Skype:huatao07
