Click image to view original image
DLX-OP08 Optical Transmitter & Receiveris a optical transmission and access equipment with medium capacity or small capacity. Adopts the up-to-data technology and special large scale integrated circuit which can be programmed. Provides 8 channels E1 digital signals data for multiple connection, branch connection and optoelectronic switching. Abundant Bit spending offers E1/G.703 port for main channel operation transmission and also offers one official phone. RS232 low rate data channel,1~4 Ethernet channels, network interior management channel and 1+1 Fiber back up and 1+1 redundant power supply optional.
DLX-OP08 optical transmitter & receiver possess loop back function of the local end and the far end for test and fault location. This equipment possess perfect fault self-diagnostic function, supports optional Link-Loss alarm function and 2Mbit/s spur track indication function. Adopts 4B5B line coding, through replacing laser transceiver module to support Single-Fiber bi-directional mode or Duplex-fiber bi-directional mode. It is adapt to point to point optical transmission link circuit and provides public network and special network with high quality, flexible and reliable optical transmission digital line.
DLX-OP08 optical transmitter & receiver possess characters of high integration degree, high reliability, low power consumption, small in size and consummate function. easy installation and adjustment free, high quality of transmission and high reliability of working. and can work stably in the poor conditions. It is very convenient to maintenance and easy to installation and adjustment.
Product Feature
● 19 inch rack, 1U height
● Offers one channel official phone for the convenience of connection between two station
● Supply 8E1 channels.
● Supports alarm function by sound and light
● Optical port: FC, ST and SC optional
● Single-fiber bi-directional transmission and Double-fiber bi-directional optional
● Supports spur-track occupied indication and alarm sound shielded function
● Supports loop back between the local end and the remote end
● Power supply: -48VDC, +24VDC or 220VAC optional
● Easy to installation and has high reliability
Technologies reference
● Fiber interface: SC, FC or ST optional
● Transmission distance: 20km, 40km, 60km, 80km, 100km, 120km optional.
● Fiber cable: Single-fiber or Duplex-fiber optional
● Light source: single-mode 1310nm/1550nm
● Transmission Light Power: ≥－12dBm
● Receiving sensitivity: ≤－37dBm
● Transmission code: 4B5B
● Light port rate(Mbps): 21.12Mbit/s
● Optical line code: HDB3
● Data rate: 2048Kbps
● Tolerance: ±50ppm
● Interface standard: ITU－TG.703
● Line impedance : 75ohm(unbalance)or 120ohm(balance) optional
● Connector: BNC or RJ45
● Indicator:
PWR: Power Indicator
BER: Bit Error Rate Indicator
RMA: Remote End Equipment Indicator
LOF: Near End Frame Indicator
RNL: Near End Optical Fiber Receive Indicator
PHONE: Office Phone Indicator
● Dimension: 480mm×220mm×44.5mm
