Click image to view original image
DLX-DVOPC Optical Convergence type Fiber Optic Transmitter and Receiver adopts passive optical components, converge optical signals to one fiber by wavelength-division. it can transmit 16channels optical signals at most, and the bandwidth of each optical signal is 2.5GHz Max. Optical Convergence type Fiber Optic Transmitter and Receiver finish the converge or separate on the optical layer. No need convert to electric signal which will decrease the signal’s attenuation. So the optical signals are free from disturbances in the transmission and good for the long-distance transmission on large capacity.
DLX-DVOPC Electric Convergence type Fiber Optic Transmitter and Receiver can transmit up to 8channels optical signals over one fiber(one channel optical signal support 1-8channels video).All videos will been recovered in the end of receiver.
DLX-DVOPC Convergence type Fiber Optic Transmitter and Receiver been used for save fibers. High stability, easy to manage and install
APPLICATIONS
● High Way & Toll Station Surveillance
● Public Security Surveillance
● Surveillance and cable TV system
● Intelligent traffic monitoring system
● High Quality Video Conference
● Broadcast and TV program transmission
● Long-distance multimedia teaching
● Industrial Closed Circuit Television Surveillance
FEATURES
● High-quality optical components for ensure the reliability, uniformity and stability.
● No intermodulation interference of analog optical transmitter and receiver
● No EMI, RFI, and Loop of sharing the ground
● Using industrial grade components to assure the stability and reliability while longtime work.
● Auto PAL/NTSC/SECAM Compatible
● Data signal support RS232,RS458,RS422,Manchester and Biphase.
● In the budget arrange, SNR >67db.
● Indicators for Power Supply, Video, Optic-link and Data-loop
● Advanced Audio, data auto-negotiation technology, don’t need adjust for various audio, data signals
● Support base on SNMP standard e-MS network management system, easy to monitor and manage large-scale video transmission network
● The longest transmission distance is more than 100KM(between two points)
● Support plug and play
● Module design, easy to add the operation channels
● Card type, standalone type,19” 1U/2U/4U Rack type optional
SPECIFICATIONS
Optical index of Optical Convergence
|
Center Wavelength
|
1260nm ~ 1360nm,
1470nm ~ 1610nm (Single-mode)
|
|
Space of wavelength
|
20nm
|
|
Sending power
|
-5 dBm ~ +3dBm
|
|
Receiving power
|
-24 dBm ~ -3dBm
|
|
Light through bandwidth
|
+ / - 6 nm
|
|
Temperature drift of launch center wavelength
|
0.08nm-0.1nm
|
|
Receiving Sensitivity
|
≤-26dBm
|
|
Connector
|
FC,SC
|
|
Wavelength of User end
|
SM: 1200nm,1610nm
MM: 850nm
|
Optical index of Electric Convergence
|
Wavelength
|
Simplemodule:1310nm/1550nm, Multimode:850nm/1310nm
|
|
Number of fiber
|
Single fiber bi-direction
|
|
Output power
|
-9dBm/-5dBm
|
|
Transmission distance
|
0-100KM
|
|
Receiving Sensitivity
|
More than -36dBm
|
|
Connector
|
FC/SC/ST/LC
|
Video
|
Channel
|
1-32
|
|
Connector
|
BNC
|
|
Bandwidth
|
8MHz
|
|
Quantization
|
10 bits
|
|
DG
|
1% typical
|
|
DP
|
1° typical
|
|
SNR
|
>67dB
|
Audio (optional)
|
Audio Input/output impedance
|
600ohm(balanced) or 10Kohm(unbalanced)
|
|
Digitization
|
24bit
|
|
Bandwidth
|
20Hz to 20KHz
|
|
Nonlinear distortion coefficient
|
≤ 1%
|
|
SNR
|
>85dB
|
|
Connector
|
Terminal Plug with screw clamps/RCA/XLR
|
Data (optional)
|
Interface Type
|
RS-232/485/422, Manchester, Biphase
|
|
Operation Mode
|
Full-duplex/Half-duplex
|
|
Data Rate
|
DC-384Kbps/DC-2Mbps
|
|
BER
|
<10E-9
|
|
Connector
|
RJ45/ Terminal Plug with screw clamps
|
Ethernet (optional)
|
Operation Mode
|
10/100M,Full-duplex/Half-duplex Self-adaptive
|
|
Throughput Ration
|
100%@10M
|
|
Packet Loss Ratio
|
0%
|
|
Connector
|
RJ45
|
Alarm,1/0 (optional)
|
Alarm,1/0 input signal
|
Any Active or Passive alarm,1/0 input. Support TTL,RS-232/422/485 or Passive switch button
|
|
Alarm,1/0 output signal
|
Any Active or Passive alarm,1/0 output. Support TTL,RS-232/422/485 or repeater output connection
|
|
Connector
|
RJ45/ Terminal Plug with screw clamps
|
E1,T1 (optional)
|
Code
|
HDB3/AMI
|
|
Speed
|
E1/T1 standard speed or E1/T1 sub-speed
|
|
Connector
|
75ohm BNC or 120ohm RJ45
|
Telephone, PBX (optional)
|
Voice bandwidth
|
8KHZ
|
|
Code
|
PCM
|
|
Signal control
|
Support any signal of analog phone or switch
|
|
Connector
|
RJ11
|
Environmental
|
Operation temperature
|
-30℃~+75℃
|
|
Storage temperature
|
-40℃~+85℃
|
|
Relative humidity
|
0-95% Non-Condensing
|
|
MTBF
|
≥10e5 hours
|
|
Power Supply
|
AC 100V~260V or DC 48V
|
Physical Dimensions
|
Optical Convergence type
|
196(L) x 155(W) x 45(H)mm
|
|
Electric Convergence type
|
480(L) x 250(W) x 45(H)mm
|
