Click image to view original image
1.Application: Suitable for once hot-press forming for brake lining.
2.Performance characteristics: The mould has the features of reasonable structure，simple operation，easy maintenance，high production，low cost and investment , quick in effect, short producing cycle, fast delivery，and applicable to small and medium-scale enterprises. It is the best choose for Small and Medium-sized Enterprises.
3.Technical data:
Material of template: 40Cr forging materials
Hardness of template: 380-420
Thickness of plating chrome: 0.03-0.05mm (branded hardware)
Boxboard material: ≥ 550 -600 GCr15 forging materials
electrothermal tube heating electrical hot plate heating
4. Operation method：
Firstly，fasten the mould on the pressing machine then laid on electricity and heat. When reaching temperature, rise the upper plate, put into the raw material which have already been weighed and make it a uniform surface. Put the partition panel which have already coated with releasing agent on the raw material in the cavity. Then, pressing, gassing and pressure maintaining according to the requirement of technology . releasing pressure when extrude the brake linings, push the pulling plate back and press the brake linings down. Lastly, pull out the brake lining and repeat the next.
4. Enclosed parts and document：
Each cavity with one block of backup partition An Operation Manual
A qualification and debugging report
Remark：According to user’s requirements ,we can change the configuration or other special design!
