Click image to view original image
TBL5042XYCF bulletproof cash in transit vehicle is modified on the basis of Ford specialized strengthen chassis by excellent modelling technology and production technology, carrying capacity is strong, capacious and comfortable internal, bigger load space and protection of superior performance. Equip turbocharged intercooler diesel engine, the use is suitable for any climate environment and geographical environment.
A) Chassis advantage
The chassis for TBL5042XYCF bulletproof cash in transit vehicle is made development jointly by Baolong, JMC and Ford as strengthen specialized chassis for bulletproof cash in transit vehicle. The chassis is modified with some special strengthen design improvement based on Ford gasoline 12 seats bus chassis, thus greatly improve the bearing capacity of the chassis(increase the gross weight from 2830kg to3800kg), make the chassis more suitable to the bulletproof vehicle modified, and at the same time, keep the original all the advantages of the bus chassis, compatible ride stability and comfort of the Ford bus. Chassis improvement scheme and its special status as follows:
1. Use reinforced FR/RR axle, reinforced FR/RR suspension system (including the spiral spring, steel plate spring and shock absorber, etc.), enhanced transmission system and enhanced brake system of Ford 17 seats bus.
2. Increase the lateral stability device of the suspension and the reinforced beam of bottom beam of the Ford 17 seats bus.
3. Reinforce internal strengthen of installation support of the hinge of the pillar and inside panel of the front door, and reinforce the hinge pin shaft diameter and strengthen the hinge, prevent the front door prolapse because modified weight gain.
4. Only change the two rows of FR seats, all other inner decoration that are irrelevant with power and ran are not making of installation, but pack up and transport together with the car, in order to avoid the damage because the modified.
The bearing capacity of the chassis and the body strength through the above strengthen modified are far more than the same type Ford bus, satisfied the modification requirements of bulletproof vehicle. In order to facilitate user to save the cost for the car, the used of chassis is the model: JX6466DF-L(Euro III) and JX6477D-L(Euro IV) with least seats of Ford light bus with same short wheelbase.
B) Modification scheme of vehicle
TBL5042XYCF bulletproof cash in transit vehicle is modified by advanced protective materials and special facilities, excellent modelling technology and production technology, strictly according to GA164-2005 Class A with all around closely bulletproof for all crew.
1. Closely bulletproof for driving cabin and escort cabin: Use Baolong’s unique using heat treatment equipment and technology, decorated with bulletproof steel in all uneven places of the pillar and FR panel and others, realize real bulletproof. Using bulletproof steel and bulletproof glass with the most thin and nice performance bulletproof, through the precise joint arrangement and clever design installation, can reduce the modified weight increase and improve the bearing capacity, and keep the perfect exterior and interior.
2. All around rigorous bulletproof for import ant parts: Engine compartment, radiator, battery, fuel tank and other import ant parts, decorate bulletproof steel around them for protection.
3. Prevention of burglary and riot for cash cabin: Use high strength steel to decortate the FR/RR door of the cash cabin and install more pin& three-way anti-theft lock common controlled by double anti-theft lock on RR door fo the cash cabin, whole inner insert type doorway of the side door hinges, after locked, can not take down the door even dismantle the door hinge from outside, the security is very solid. Gear meshing sliding type of opening door, light operation and smooth glide.
4. The front door to strengthen: Make reasonable strengthen in the A pillar and installation hinge parts of the front door, prevent flagging phenomenon of the door because increased weight.
5. Modified middle door: Modify the sliding door to turning door, and use high strength hinge to eliminate derailment phenomenon of the sliding middle door after made of armored.
6. The door locator: Install the V load bearing type door locator between the pillar and the door, to bear the large power vibration produced with shaken up and down of the door, and to avoid the easy damage with excessive standunderload of the door lock system, also can prevent vibration and sank for weight gain of the door.
7. Elevating shooting holes: Make the elevating shooting holes on the front door, it is convenient for documents transfer and ventilation, and make outside push type round shooting holes on the door of escort cabin.
8. Crashproof bumper: Install strength FR/RR crashproof bumper with same color of car body on the vehicle. Decorate bulletproof and ventilative grille on the middle place for radiator on FR bumper, and decorate anti-skid pedal on the middle place of the RR bumper, and install reverse radar searching unit on it.
9. Alarm: Install alarm host in instrument desk.
10. Monitor: Monitor with double camera and the best suspension color LCD screen at present . Two cameras is installed on front upper part inside and on upper part outside of RR door of the cash cabin, and decorate waterproof cover for the camera outside of the RR door. There are manual switching key on the display screen, can choose to monitor situation inside of the cashcabin and the back road conditions of the vehicle, and that can automatically switch to rearview state. Hanging type display screen is installed on the position of rearview mirror in cabin of the original car, and replace the original rearview mirror, this is not only satisfied driving habits for driver to see the rearview mirror, and can avoid sun exposure and prolong the service life of the display screen. In the monitor host, reserve video collection output and input interface, can satisfy the video, play and wireless transmission needs.
11. Skylight: Install skylight on the roof of the escort cabin for aeration and escape
12. Exhaust pressure relief devices on back door: On both sides below of partition of cash cabin are installed the exhaust ventilation grille, in order to decrease air compression resistance when the door closed.
13. Extending water flow sink: Since the water flow sink on both sides of original Ford roof are stop to A pillar above of the front door, when open the door in rainy day, the water in the flow sink will flow to the inside of the car. In order to make up for the defect of the Ford car, Baolong company has extended the water flow sink to the front of rearview mirror, eliminate the dripping phenomenon.
14. Seats in escort cabin: Install unitary three seats, and can be folded over on, with convenient use the front door of the escort cabin.
15. Interior of escort cabin: Develop mould for the interior trim of the body newly, and combination to diecast the interior trim of the body by most upscale interior fabrics, organic polymer compound heat insulation materials and light metal material. not only ensure the interior trim to meet the original cars, and have a more excellent function of heat insulation, effectively protect the refrigeration effect of the air condition.
16. Interior of cash cabin: Decorate silver pattern alloy plates around, fire prevention cloth roof, pattern steel plate for floor.
17. Rubber belt for back door: Add handle with rupper belt on the back door.
Standard equipment
Central door lock
Power steering
Air condition
Escape skylight
Vehicle-mounted fire extinguisher
Vehicle-mounted alarm
Hanging type double lens LCD monitors
Elevating shooting (delivery) hole on the front door
Hold out round type shooting (delivery) hole on the door of escort cabin
Right turn outside opening door of escort cabin
Extend water flow on the front door
Load bearing door locator
Hung sliding type for the front door of cash cabin
Pattern steel floor for cash cabin
Dual lock and three pin type for lock of cash cabin
Pressure relief devices for the door of cash cabin
Rubber belt for rear door
Front and rear crash bumper
Main parameter|
Model: |
TBL5042XYCF2 |
TBL5042XYCF3 |
|
Chassis model: |
JX6466DF-L |
JX6477D-L |
|
Engine model: |
JX493ZLQ3 |
JX493ZLQ4 |
|
Displacement(cc): |
2771 |
|
|
Emission: |
Euro III |
Euro IV |
|
Max. power(kw/rpm): |
85/3600 |
80/3600 |
|
Max. torque(N.m/rpm): |
285/2000 |
|
|
Driving type: |
4×2 |
|
|
Max. speed(km/h): |
≥120 |
|
|
Overall dimensions (L*W*H)(mm): |
4896×1974×2031 |
|
|
Cash cabin capacity (m3): |
2.5-3.0(Depends on client's need） |
|
|
Gross vehicle weight (kg): |
3510 |
|
|
Curb weight (kg): |
2230 |
|
|
Payload (kg): |
1280 |
|
|
Seats(person): |
6 |
|
|
Wheel base(mm): |
2835 |
|
|
Suspension(FR/RR)(mm): |
1085/976 |
1085/1066 |
|
Tread(FR/RR)(mm): |
1692/1700 |
|
|
Tyer: |
215/70R15C（8PR） |
|
|
Tyer number: |
4 |
|
|
Min. round clearance(mm): |
165 |
|
|
Fuel tank (L): |
68 |
|
|
Protection level: |
GA164-2005 Class A |
|
