Single tooth-roller crusher advantages

The single-toothed roller crusher actually combines the jaw crusher and part of the structure of the roller crusher, thus having the characteristics of both crushers. The single-tooth roller crusher has a large feed port, and the roller surface is equipped with different crushing racks. When the bulk material is fed, the higher rack clamps the bulk material and cracks and impacts. The method breaks it up, then falls to the bottom, which is then further broken to the required size by the smaller teeth. In a crusher, there are pre-crushed areas and secondary crushing areas, so it can be used for coarsely crushed materials, and the crushing is relatively large, up to 15. When it is broken, the block is pulled out of the machine by the tooth ribs on the roller, so it is forced to discharge.
The single-tooth roller crusher is suitable for the rough-breaking operation of metallurgical sinter of working temperature below 900 °C in steel production enterprises; it is suitable for coarse crushing and medium-breaking of hard brittle materials with no crushing pressure of more than 20KN/cm2 in concentrating plant, stone material plant and power plant. Broken work.

Single tooth-roller crusher advantages:

1. The toothed roller shaft, crown and jaw of the single-tooth roller crusher all adopt the internal channel water cooling system, and the cooling effect is excellent (after 10 minutes of shutdown, the crown temperature is only 60 degrees Celsius).

...

For details, please click to visit:http://www.zymining.com/product/single-tooth-roller-crusher/