Click image to view original image
With the continuous introduction of timber pelletizer equipment into the market, the development of mechanical tools is additionally regularly changing. The wear and tear of the mold and mildew during the production of timber pellets is likewise a significant price. So, just how to keep it straight impacts the service life of the timber pellet making maker. As a result, it also directly impacts the handling cost of timber pellets. How to make the mold and mildew life of the timber pelletizer machine equipment much longer? Obtain your solution today!
Related post: wood pelletizer machine
① Frequently tidy oil as well as fill
If the timber pelletizer device is not used for a month, it is advised to cleanse the oil inside, so the oil will gradually harden throughout long-lasting storage space, which will certainly make it tough to eliminate the following time it is made use of, which will seriously impact the succeeding use of the mold of timber pelletizer maker.
After the pellets are processed, it is needed to use oil to grind for a period of time to make certain that all the oil stays in the die opening, which is of excellent advantage to the work the next day and also is additionally conducive to the long-term use of the die. The oil can be blended with waste engine oil as well as wood chips. It can be made when as well as can be reused.
Related post: wood pellet plants
② No demand to clean the mold and mildew for a very long time
If the mold and mildew and also pinch rollers are no longer used for a long period of time, it is recommended to remove the mold after cleansing as well as storage space. The master cleanses the sawdust pellets inside the mould and also abides by the mould surface. In this way, on the one hand, we can protect against the enterprise from being difficult to remove the pellets because of the hardening of the pellets because of the lasting storage space of the trainees. On the other hand, due to the fact that the sawdust has water absorption, if the sawdust externally is not removed, it may accelerate the development of the rust of the mold and mildew surface area.
③ The mold and mildew must be saved in a completely dry and ventilated location
Most of the molds of the wood pelletizer equipment are made of alloy steel. If they are in a humid place for a very long time, the surface of the mold may be damaged because of air deterioration, hence greatly minimizing its service life.
Related post: Germany 2-2.5T/H Wood Pellet Plant
④ The taking care of procedure must beware
The mold and mildew of the wood pelletizer device is a high-precision component, and also the mold hole is carefully refined according to the compression proportion of the mold and mildew. If you are careless throughout the dealing with procedure, the structure of the inner wall of the mold opening is damaged, which might cause molding throughout processing. reduced rate and also short service life.
The above are the suggestions on how to make the mold and mildew life much longer for timber pelletizer device Follow these five approaches to keep the mold and mildew, and also I believe your mold will last much longer.
( 2) Why do the pellets produced by the wood pellets device have a poor appearance?
Why do the pellets generated by the wood pellet mill machine look bad? Today we will figure out why. During the production of timber pellet gas by the wood pellet production device, there will be a scenario where the pellets have powder and also have a rough surface. At this time, it is likewise necessary to inspect the equipment data setups of the wood pelletizer equipment. Besides, what is the reason for this phenomenon?
Wood pellets create more timber pellet powders, this feedstock can be brought on by reduced moisture material, the wetness content of timber pellet maker feed is generally between 12% and ~ 15%. After readjusting the wetness content of the raw product, the trouble still exists, that is, the pressure roller die is seriously used. When the internal surface of the ring die of the timber pelletizer device is drastically used or the fragment diameter requires to be changed, it requires to be changed. The surface area of the sawdust pellets is harsh, which might be triggered by the excessive dampness web content of the raw product, or the initial use of the mold and mildew. This problem can be addressed by readjusting the moisture content of the raw material, or by repeatedly grinding the mold with the material.
Related post: RICHI pelletizer machine
To summarize, the reasons that the pellets generated by the timber pelletizing equipment are bad in appearance are stated today. I wish it will help you when you use the wood pellet equipment again. Over the years, Richi Machinery has actually concentrated on the r & d as well as production of timber pelletizer equipment devices, biomass pellet equipments, sawdust pellet equipments, fuel pellet machines, wood processing tools, drying out devices, cooling devices as well as packaging devices.
( 3) Recommended timber pellet maker.
There are many timber pellet mill maker on the marketplace. Today, Richi Machinery will advise some of them:
① The very first kind of little wood pelletizer maker
It is a new kind of biomass power equipment separately established by our company's technological staff as well as has independent intellectual property legal rights. The wood pelletizer equipment is easy in framework, very easy to operate, stable in operation, and also can work continually. The pressed pellets have the advantages of high density, high burning worth, low dampness as well as reduced ash material. The timber pellet maker equipment transmission adopts high-precision gear transmission, four sets of equipments are connected, and also the hydraulic oil distribution system can automatically flow oil in between the transmission and also the primary shaft bearing. The service life of the main shaft as well as transmission gears.
Related post: https://www.pellet-richi.com/wood-pellet-machine/wood-pellet-mill.html
The working parts of the wood pelletizer machine die plate, pressure roller) are made of alloy steel, and also the solidity after heat therapy can get to more than 50, which ensures the continuous procedure of the device as well as prolongs the service life of the whole timber pelletizer device The digital control system of the primary engine embraces the global typical setup of star-delta beginning, and also the procedure is exceptionally secure.
② The 2nd kind of small timber pelletizer machine.
Generally ideal for granulation of crude fibers, such as corn stalks, sawdust, rice husks, cotton stalks, cottonseed husks, weeds and other crop stalks as well as factory wastes. It is suitable for reduced temperature granulation of organic bacterial plant food, organic fertilizer and also substance plant food.
Features of this wood pelletizer equipment:
① The stress rollers are uniformly distributed, and the operation is secure. At the same time, journalism location is increased, and also the production efficiency is enhanced.
② The screw facility pressure controling framework is taken on, as well as the timber pelletizer machine mold void can be large or little, which is suitable for different products to ensure the important impact.
③ This version is outfitted with Φ6-Φ10mm diameter mold and mildews, which are suitable for granulation of different products as well as attain the most effective benefit.
For more details: Richi Machinery
Email Address: enquiry@pellet-richi.com
Phone/Whatsapp: 0086-13838389622
